background image

NMD 11-04

INSTRUCTION

LEAFLET

AND

GUARANTEE

RIGID FRAME AND FORKS – LIFETIME

All rigid frames and forks (with the exception of suspension forks, suspension 

frames and rear shocks) - lifetime warranty.

COMPONENT PARTS – 1 YEAR

All other components (including suspension forks, suspension frames and rear 

shocks) - 1 year warranty.

All the above warranties apply, provided the bicycle has been properly cared 

for, maintained and used, and are warranted against manufacturing or material 

defects for the warranty period stated. This warranty is applicable from the date of 
purchase for the original owner only, who must produce proof of purchase in order 

to validate any claim. Claims must be submitted through your retailer. This warranty 

does not include labour and transportation charge. The company can accept no 
responsibility for consequential or special damage. This warranty applies only in 

the case of defective components and does not cover the effects of normal wear 

and tear or damage caused by accident, abuse, excessive loads, neglect, improper 

assembly, alteration of original specification, improper maintenance or the addition 

of any item inconsistent with the original intended use of the cycle.

No bicycle is indestructible and no claims will be accepted for damage caused 

by improper use, competition use, stunt riding, ramp jumping, leaping or 

similar activities. Our bicycles conform to BS 6102: Part 1: 1992 as set by the 

British Institute Testing Services. We reserve the right to change or amend any 

specifications within this brochure without notice. All information and specifications 

within this brochure are correct at the time of going to press.

 

NOTICE

In offering this warranty, Falcon Cycles Ltd in no way seeks to diminish the 

statutory rights of the consumer.

Please refer to our website for the latest information.

http://www.falconcycles.co.uk

FALCON CYCLES LTD, P.O. BOX 3, BRIDGE STREET, BRIGG, 

NORTH LINCOLNSHIRE, DN20 8PB 

TEL: (01652) 656000 FAX: (01652) 650040

CYCLES LTD

1

Summary of Contents for CYCLES





















Reviews: