background image

1

 

i-TOP & i-TOP DUO  
INDUCTION TOPS 

INSTALLATION, SERVICING  
and USER INSTRUCTIONS 

IMPORTANT 

The installer must ensure that the installation of the appliance is in conformity with these 

instructions  and National or Local Regulations in force at the time of installation.

 

This  appliance has been CE-marked on the basis of compliance with  the  Low  Voltage 
and  EMC Directives for the voltages stated on the data plate.

 

WARNING

THIS APPLIANCE MUST BE EARTHED.

 

On completion of the installation, these instructions should be left with the Engineer-in-
Charge for  reference during servicing. Further to this, The Users Instructions should be 
handed over to the User,  having had a demonstration of the operation and cleaning of the 
appliance.

 

IT IS MOST IMPORTANT THAT THESE INSTRUCTIONS BE CONSULTED 
BEFORE INSTALLING  AND COMMISSIONING THIS  APPLIANCE. FAILURE 
TO COMPLY  WITH THE SPECIFIED  PROCEDURES MAY RESULT IN 
DAMAGE OR THE NEED FOR A SERVICE CALL. 

Falcon

 

Foodservice

 

Equipment

 

Head

 

Office

 

and

 

Works

 

Wallace

 

View,

 

Hillfoots

 

Road,

 

Stirling

 

FK9

 

5PY

 

Serviceline

 

t:

 

01438

 

363

 

000

 

f:

 

01438

 

369

 

900

 

Summary of Contents for i-TOP












Reviews: