background image

 

ENGLISH 

Important safety instructions! Please read before connection!

 

 

 

DANGER! (For babies and children) 

Dispose of or store any packaging material properly! Packaging material must be kept out 
of the reach of babies and children due to the 

risk of suffocation

 
Ensure that children never use the appliance unattended! In addition, make sure that 

children do not remove (small) parts from the device, as they could suffocate by swallowing 
parts! 

 
 

Hint! (Fire hazard due to overheating) 

The maximum permissible ambient temperature of this device is 

40°C

.   

 

 

Ensure that the unit is placed in a well-ventilated location away from direct heat sources, 

naked flames, combustible materials, and liquids. A minimum distance of 1 m is required. 
 

Do not tape or cover the ventilation slots of the unit, or insert objects into the unit.

 

 
 

Hint! (Operating conditions) 

Due to its structural characteristics, the device is designed for indoor operation (IP20).  

 
Never expose the unit to rain, moisture or liquids as this may cause damage.  

 
Vibrations, dust or sunlight can also cause damage, avoid them! 

 
 

Hint! (Condensation) 

To avoid condensation in the unit, the unit should adapt to the ambient temperature 

before commissioning. 
 

 

Hint! (Unwanted odours) 

A new product can sometimes lead to unwanted odours. This reaction is normal and 

disappears after a few minutes. 
 

 

Hint! (Damage to loudspeaker diaphragms due to feedback) 

Avoid feedback by keeping the microphone away from activated speakers that are 
simultaneously listening to the signal. If necessary, turn off the speakers completely. 

 
 

Hint! (Sensitive microphone capsule) 

To avoid damage to the microphone capsule - never open the microphone basket! 

 
 

Hint! (Sound pressure level/noise level to noise distance) 

Observe the specified sound pressure level/noise level spacing to prevent destruction of 

the diaphragm caused by extreme levels. 

 
 

Summary of Contents for MSW Pro









Reviews: