- 1 -
DRM-01
24 V
Microwave motion sensor,
with presence detector
The motion sensor is used for automatic and temporary swit-
ching on of lighting if a person or other object appears in places
such as hallways, courtyards, driveways, garages, etc.
The sensor can detect movement through wooden, plasterbo-
ard, glass and plastic panels.
The DRM microwave sensor operates as a radar by using high
frequency electromagnetic waves to detect movement in a mo-
nitored area. It is most effective when the movement takes place
directly towards the sensor. In addition, the DRM has a built-in
twilight switch that prevents the controlled lighting from swit-
ching on during the day. When motion is detected after dusk,
the lighting will be switched on and will remain on as long as
motion is detected. When the movement stops, the light rema-
ins switched on for a specified back-up time, after which it is
switched off.
Purpose
Functioning
F&F Filipowski L.P.
Konstantynowska 79/81, 95-200 Pabianice, POLAND
phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71
www.fif.com.pl; e-mail: biuro@fif.com.pl
Do not dispose of this device in the trash along with other waste!
According to the Law on Waste, electro coming from households free of charge and can
give any amount to up to that end point of collec� on, as well as to store the occasion of
the purchase of new equipment (in accordance with the principle of old-for-new, regard-
less of brand). Electro thrown in the trash or abandoned in nature, pose a threat to the
environment and human health.
