F&F Filipowski sp. j.
Konstantynowska 79/81 95-200 Pabianice
phone/fax: (+48 42) 215 23 83 / 227 09 71 POLAND
http://www.fif.com.pl e-mail: fif@fif.com.pl
ELECTRICITY CONSUMPTION METER
three-phase
Do not dispose of this device to a garbage bin with other unsorted waste!
In accordance with the Waste Electrical and Electronic Equipment Act
any household electro-waste can be turned in free of charge and in any
quantity to a collection point established for this purpose, as well as to the
store in the event of purchasing new equipment (as per the old for new rule,
regardless of brand). Electro-waste thrown in the garbage bin or abandoned
in the
bosom of nature pose a threat to the environment and human health.
LE-03
WARRANTY.
The F&F products are
covered by a warranty of the 24 months
from the date of purchase. Effective only
with proof of purchase. Contact your
dealeror directly with us. More infor-
mation how to make a compliant can be
found on the website:
www.fif.com.pl/reklamacje
Sealing
Meter number
Dimensions
Pulse output
The meter is equipped with pulse output SO+ - SO-. This allows
you to connect another pulse device (SO) that reads pulses
generated by the meter.
No additional connected equipment is required for proper opera-
tion of the meter.
The meter has sealable input and output terminal covers
to prevent any attempts to bypass the meter.
The meter is marked with individual serial number allowing its
unambiguous identification. The marking is laser engraved and
cannot be removed.
Length of the SO+ SO- pulses depends on the load of the meter:
5÷40A
80 ms
75A
46 ms
45A
75 ms
80A
42 ms
50A
68 ms
85A
40 ms
55A
62 ms
90A
38 ms
60A
57 ms
95A
36 ms
65A
52 ms
100A
34 ms
70A
48 ms
Purpose
Functioning
LE-03 is a static (electronic) calibrated electricity meter of three-
phase alternating current in a direct system.
A special electronic system under the influence of flowing current
and applied voltage in each phase generates pulses proportional
to the energy drawn in the respective phase. Energy consumption
in the phase is indicated by a flashing of corresponding LED (A, B,
C). The sum of the three phase pulses is indicated by a flashing LED
(800 pulses/kWh) and converted into energy absorbed
throughout the three-phase system. Its value is displayed by the
segment LCD display. The fractional digit represent the decimal
(.1 kWh = 100Wh).
Meter front description
LCD displa
y
kWh r
eading LED
met
er number
terminal c
ov
er
s
sealing poin
ts
A
B
C
imp/kWh
phase load LED
888888.8
- 1-
- 2-
- 3-
- 4-
5
9 0 8 3 1 2
5 9 1 7 0 2
