- 1 -
MB-LI-4 Hi
Pulse counter,
4-channel,
with Modbus RTU output
The MB-LI-4 pulse counter is used for counting the AC/DC signals
generated by external devices to determine the number of com-
pleted work cycles and for exchanging the data via RS-485 port
in accordance with the Modbus RTU protocol.
»
4 independent counters;
»
Counter input designed to work with AC/DC signals 160÷265 V;
»
Factor adjustment (a floating-point value);
»
Rescaled value (Number of pulses × factor);
»
Selecting a mode of state 1 trigger: high or low voltage;
»
Selecting an input pulse edge (leading or trailing);
»
Frequency filter that allows you to limit the maximum frequ-
ency of counted pulses (to eliminate interferences on the
input of the counter);
»
Memory of counter status after power failure;
»
Digital input.
Purpose
Functions
F&F Filipowski sp. j.
Konstantynowska 79/81, 95-200 Pabianice, POLAND
phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71
www.fif.com.pl; e-mail: biuro@fif.com.pl
Do not dispose of this device in the trash along with other waste!
According
to the Law on Waste, electro coming from households free of chage and
can give any amount to up to that end point of collec� on, as well as to sto-
re the occasion of the purchase of new equipment (in accordance with the
principle of old-for-new, regardless of brand). Electro thrown in the trash or
abandoned in nature, pose a threat to the environment and human health.
