Installation (cont)...
2.5. Mount the base in the desired position using the fasteners supplied.
2.6. Replace the fan body in-between the spigots and tighten the two
retaining clamps or clamp screws.
Fan Maintenance
3.1. Inspect the fan at least once every 12 months to ensure that the motor
and fan blades are clean. Any build up of dust should be removed using
a non-abrasive cleaner.
3.2. All fastenings should be checked for tightness.
3.3. Bearings are of the ‘sealed for life’ type and will not need a detailed
inspection.
Wiring Diagram
Contact Us
Part No: INST-RIL-SW 11/12
RIL-150SW
RIL-200SW
INSTALLATION & MAINTENANCE
INSTRUCTIONS
In-Line
Duct Mounted Fan
