WARNING
Read these instructions fully before operating this machine.
Keep these instructions for future reference.
This tool is intended for use as a polisher.
As with all power tools,
failure to follow all of the instructions provided may result in electric shock, fire and/or serious injury.
GENERAL SAFETY INSTRUCTIONS
Do not use this tool as a sander, grinder, cutter or for wire brushing.
Using a power tool for anything other than its
intended purpose could result in serious injury.
Do not alter or modify this tool in any way.
Failure to follow this instruction will invalidate any and all warranty as
well as presenting a significant risk of injury.
Use personal protection equipment.
Depending on the surfaces being polished and the products being used,
users and bystanders should wear the appropriate personal protection equipment, such as safety goggles or
glasses, face shields, dust masks, ear defenders, gloves, coveralls or aprons.
Only use Farécla accessories with this polishing machine.
Please contact your local distribution agent for
details of all available applicator pads.
Never use damaged accessories.
Before use, inspect all accessories and ensure that they are free from defects
WORKING ENVIRONMENT
•
Only work in a clean and well-lit area
•
Power tools create sparks. Do not use in explosive environments, such as in the presence of flammable
liquids, gases or dust
•
Keep your working environment free from bystanders. Distractions can cause accidents
ELECTRICAL SAFETY
•
Do not use in wet conditions. Water entering a power tool will increase the risk of electric shock
•
If using the machine outside, use an extension cord suitable for outdoor use that has the appropriate rating
•
Never use the cord for carrying, pulling, or unplugging the power tool. Keep the cord away from heat, oil,
sharp edges and moving parts
•
Keep the power cord away from the path of the polisher
MANUAL
Operating voltage
Rated output
Frequency
No-load speed
Orbit diameter
Backing plate
Weight
Spindle thread
Insulation class
Sound power
Sound pressure
Vibration (main handle)
Vibration (aux handle)
220-240V
500W
50/60Hz
2000 - 4500opm
15mm
123mm
2.6kg
M8
II
92.9 dB(A)
81.9 dB(A)
4.5m/s2
4.9m/s2
TECHNICAL SPECIFICATIONS
DUAL ACTION
POLISHING MACHINE.
LIT2034 (
V1 12-2019)
T O O L S &
E Q U I P M E N T
Farécla Products Ltd, Broadmeads, Ware, Hertfordshire, SG12 9HS, UK. | TEL: +44 (0)1920 465 041 | E-Mail: enquiries@farecla.com |
www.farecla.com
S U R F A C E F I N I S H I N G
S P E C I A L I S T S
fareclaproductsltd
