BOM #: 05-MAN-2321-01-WS
Size: 210x297 mm
Date: 2021-MAR-4
ADVENTURE FORCE HOT ROD RACER
READ THIS MANUAL before attempting to operate the device.
SAVE THIS MANUAL. This manual contains important operating instructions for this device.
IMPORTANT
PARTS DETAIL
INSTRUCTIONS
RACER
REMOTE CONTROLLER
Smoke Release
Battery Instruction
Smoke
Release
1. Turn the Switch on Racer to
ON
position, and turn the Switch on Remote Controller to
ON
position. Then the Racer is ready to go.
2. If you do not want any sound effect during play, turn the Switch on Racer to
position to play in Mute mode.
3. Please use the Gas Tank that comes with this set to add Water to the Racer. Please only add around 6 drops in an empty water container.
DO NOT over fill the water container.
7. For better Battery life, turn the Switch on Racer to
OFF
position, and turn the Switch on Remote Controller to
OFF
position after play.
BATTERIES SHOULD BE REPLACED UPON PURCHASE FOR OPTIMAL PERFORMANCE.
DO NOT MIX OLD AND NEW BATTERIES.
DO NOT MIX ALKALINE, STANDARD (CARBON-ZINC) OR RECHARGEABLE BATTERIES.
REMOVE BATTERIES FROM INFREQUENTLY USED DEVICE BETWEEN USES.
4. Only use this product with clean, room temperature water.
5. Do not use salt water or soapy water.
6. After playing, remove the water cover and put the Racer upside-down to remove any remaining water.
Remove this cover
to fill in Water
OFF/ON/MUTE Switch
Forward/Backward
Left/Right
ON/OFF
Switch
Battery Instruction
