Safety Message to Installers of Warning Light Equipment
People’s lives depend on your proper installation and servicing of Federal Signal products. It is important to
read and follow all instructions shipped with this product and the original product. In addition, listed below
are some other important safety instructions and precautions you should follow:
• To properly install the lighting system, you must have a good understanding of automotive systems,
along with proficiency in the installation and use of safety warning equipment.
• Do not install equipment or route wiring in the deployment path of an airbag.
• If a vehicle seat is temporarily removed, verify with the vehicle manufacturer if the seat needs to be
recalibrated for proper airbag deployment.
• You should frequently inspect the light system to ensure that it is operating properly and that it is
securely attached to the vehicle.
• When drilling into a vehicle structure, be sure that both sides of the surface are clear of anything that
could be damaged.
• Refer to the instructions packed with related products for additional precautions and information.
• File these instructions in a safe place and refer to them when maintaining and/or reinstalling the product.
• Do not stare directly into the lights at a close range or permanent damage to your eyesight may occur.
Failure to follow all safety precautions and instructions may result in property damage, serious injury, or
death.
Product Overview
This publication has instructions for permanently mounting the Split Vision SLR to a vehicle with adjustable
mounting feet. One kit is supplied with VSLR3 and two kits with VSLR6 and VSLR8 models. For electrical
installation instructions, refer to the installation and maintenance instructions packed with the lightbar.
Unpacking the Kit
After unpacking the kit, inspect it for damage that may have occurred in transit. If it has been damaged, do
not attempt to install or operate it. File a claim immediately with the carrier, stating the extent of damage.
Carefully check all envelopes, shipping labels, and tags before removing or destroying them. Ensure that the
parts in the Kit Contents List are included in the package. If you are missing any parts, contact Customer
Support at 1-800-264-3578, 7 a.m. to 5 p.m., Monday through Friday (CT).
Installation Instructions for the Adjustable
Mounting Kit for the Split Vision SLR
25500018A REV. A 512