1
Outdoor
1
2
1A
3
2
4
5
Installation Instructions for
Chappman Outdoor Post
1.0
OL13607
OL13607
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Secure the fixture to the post with the post screws making sure to neatly tuck in all wiring.
Insert the glass panels into the fixture and secure them in place using the panel brackets and screws.
Screw the lamp into the socket. Refer to the label on the socket for Max Wattage information.
Place the fixture cover on top of the fixture and secure it in place using the cover screws.
POST
3
6
CAUTION RISK OF FIRE
-
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
G
P
I
:
ENERAL RODUCT NFORMATION
This product is safety listed for wet locations.
Incandescent lamps may be dimmed with a standard incandescent dimmer.
LED
LED
lamps may be dimmed with a
dimmer. Consult lamp manufacturer for
additional information.
This instruction shows a typical installation.
7
POST SCREW
4
FIXTURE
4
LAMP
5
6
PANEL SCREW
AND BRACKET
GLASS PANEL
COVER SCREW
SOCKET
FIXTURE COVER
7
