Guilin Feiyu Technology Incorporated Company
Guilin Feiyu Technology Incorporated Company www.feiyu-tech.com service@feiyu-tech.com
- 1 -
MG Lite / MG V2 Gimbal Firmware
Upgrade Manual
Attention :
Please install the batteries before firmware upgrade.
The firmware upgrade software only supports the Windows operation system
provisionally.
Please operation step by step strictly and make sure c
lick the ―OPEN‖ button
to open the com port before the USB mini terminal of the USB cable connect to
the gimbal.
If you want to get the current version of the gimbal, please execute step 1~6.
1. Download the USB driver from FY-TECH official website and install. Then
download the dedicated firmware upgrade software and the firmware for
Gimbal-Update-3AXIS gimbal.
2. After successful install the USB driver, please refer to the above connection
diagram, connect the USB cable to the USB connecter then insert the USB
connecter to the computer. Confirm the port number in device manager (If the
port number is more than COM10 , please modify to the available number
which less than COM10 ).
3. Open the software
——―Gimbal-Update-3AXIS‖
.
