background image

PLEASE READ AND SAVE THIS MANUAL WITH YOUR ORIGINAL RECEIPT

Customer Service:  1-800-955-0959

PRODUCT USAGE GUIDE

CC4-2       

Sheet capacity*:

Shred type:

Confetti 

Shred size:

5/32" x 2"

Entry width:

9-1/2"

Recommended use:

10-20 shredding passes per day

Maximum running time:

5-7 min. on/15 minutes off

*Sheet capacity measured with 20 lb., 8-1/2" x 11" paper with the shredder operating at rated voltage.
Different paper weights, humidity, and electrical currents will affect capacity.

USE 

AND CARE MANUAL

PAPER SHREDDER

Personal Series

MODELS

CC4-2

Summary of Contents for CC4-2

Page 1: ...ize 5 32 x 2 Entry width 9 1 2 Recommended use 10 20 shredding passes per day Maximum running time 5 7 min on 15 minutes off Sheet capacity measured with 20 lb 8 1 2 x 11 paper with the shredder operating at rated voltage Different paper weights humidity and electrical currents will affect capacity USE AND CARE MANUAL PAPER SHREDDER Personal Series MODELS CC4 2 ...

Page 2: ...gents may combust causing serious injury Use only a recommended oil in a non aerosol con tainer See MAINTENANCE Do not use this product if it or the cord has been damaged in any way Do not open the cover for any reason Doing so can expose you to dangerous voltages and will void your warranty Power Cord Care Place power cord in an easily accessible position because it is the main disconnect switch ...

Page 3: ...sket Cool Down Cycle This shredder is protected with a special safety feature which prevents the motor from overheating with exten sive use When shredding is attempted beyond the machine s maximum running time the shredder will automatically shut off its motor until it has cooled to an acceptable operating level This is nor mal and the shredder will return to operation after the cool down or off p...

Page 4: ...ime and requires a cool down time See Product Usage Guide on front panel e Shredder is not assembled prop erly See Assembly a Cutting blades need to be oiled REGULARLY See MAINTE NANCE section a Shredder has exceeded the maxi mum run time and requires a cool down time See Product Usage Guide on front panel b Shredder is jammed See OPERATION Clearing a Jam a Cutting blades need to be oiled REGULARL...

Reviews: