CPX-IOT
Gateway
Festo SE & Co. KG
Ruiter Straße 82
73734 Esslingen
Deutschland
+49 711 347-0
www.festo.com
Operating instructions
8154928
2021-03b
[8154930]
Translation of the original instructions
© 2021 all rights reserved to Festo SE & Co. KG
EtherNet/IP®, OPC UA®, PI PROFIBUS PROFINET®, SPEEDCON® are registered
trademarks of the respective trademark owners in certain countries.
1
Applicable documents
All available documents for the product
Document
Table of contents
CPX system descrip-
tion (CPX-SYS-...)
–
Detailed information on the CPX terminal.
–
General information on the [PS] and [SF] LEDs.
–
General information on the equipotential bonding of the functional
earth.
Application notes
–
Enter ‘CPX-IOT’ keyword.
–
Expert knowledge on the product application.
–
Commissioning instructions
Tab. 1: Applicable documents
2
Safety
2.1
Safety instructions
–
Use the product in its original status without any unauthorised modifications.
–
Use the product only within the limits defined by the technical data.
–
Before working on the product: switch off the power supply and secure it
against being switched back on.
–
Observe the handling specifications for electro-statically sensitive devices.
–
Only commission a module that is completely mounted and connected.
2.2
Intended use
The product is intended for use in an industrial environment as a gateway
between Industrial Ethernet networks and an on-premise MQTT broker.
Outside industrial environments, e.g. in commercial and residential/mixed-use
areas, it may be necessary to take measures to suppress radio interference.
2.3
Training of qualified personnel
Work on the product should only be conducted by qualified personnel. The quali-
fied personnel must be familiar with installation of electrical control systems.
3
Additional information
–
Contact the regional Festo contact if you have technical problems
–
Accessories and spare parts
4
Product overview
4.1
Licence information
This product uses open-source software.
Licence
Version
GNU General Public License
Version 2
GNU Lesser General Public License
Version 2.1
Tab. 2: Open-source software
The licence conditions of the GPL, LGPL and the other open-source licences can be
viewed via the integrated web server of the product:
1. Connect the gateway to a computer at the ‘Device’ network connection.
2. Call up the web server and log in
https://<IP_address_of_the_network_connection_‘Device’>/cgi-bin/system-
about
4.2
Structure
4.2.1
Product design
1
2
3
4
5
6
Fig.1
1
LED displays
2
"Cloud" network connection
3
"Device" network connection
4
Rotary switch for the operating
mode
5
DIL switches
6
Interface to the CPX terminal
4.2.2
LED displays
Network-specific LED displays
Gateway-specific LED displays
Cloud
(blue)
‘Cloud’ network status
PS
(green)
‘operating power supply’ status
NS
(red/green)
‘Device’ network status
PL
reserved
TP1
(green)
‘Cloud’ connection status
(Link/Traffic)
SF
(red)
System errors
TP2
(green)
‘Device’ connection status
(Link/Traffic)
M
(yellow)
Module status
Tab. 3: LED displays
Normal operating status
Behaviour of the LED displays in the normal operating status:
–
The [PS] and [NS] LEDs are green.
–
The [Cloud] LED is blue.
–
The [TP1] and/or [TP2] LEDs are steady green or flashing green.
–
The [PL], [SF] and [M] LEDs are off.
Module location
The [PS], [PL] and [NS] flash synchronously.
4.2.3
Switching elements
1
2
3
Fig.2
1
DIL switch 1
2
DIL switch 2
3
Rotary switch for the operating
mode
DIL switches
DIL switch 1
Description
1: OFF
2: OFF
(delivery status)
reserved
1: ON
2: ON
reserved
Tab. 4: DIL switch 1
DIL switch 2
Description
1: OFF
2: OFF
(delivery status)
reserved
1: OFF
2: ON
reserved
