DIGITAL COMPASS WITH ALTIMETER
Instruction Manual
1. Introduction
1.1 Features:
Altimeter (m, feet)
Digital compass
Barometric pressure (hPa, inHg, mmHg)
Temperature (
℃
or
℉
)
256 set of altitude and barometric pressure data history
Forecast icons based on changing barometric pressure
12/24 clock format
Perpetual calendar
Time and date by manual setting
LED backlight
Lanyard included for easy carrying
1.2 Button function
If key idle 30minutes and pressure change within 0.4hpa, LCD off. Press any button again to
resume nomal LCD display.
1.2.1 The “AL” button
- While in setting mode, press “AL” button to increase the value
- While in normal display, press “AL” button to shift the display of barometer and
absolute/relative altitude.
- While in absolute altitude display mode, hold the “AL” button for 2s, the absolute
altitude will be reset to relative altitude and the initial value is zero. Hold the “AL”
button for 2s, the relative altitude will be reset to absolute altitude again. Relative altitude
mode is useful when accumulated altitude reading is desired.
1.2.2 The “COMPASS/-” button
- While in setting mode, press “COMPASS/-” button to decrease the value
- While in normal display, press “COMPASS/-” button to enter compass mode
-
While in compass mode, press “COMPASS/-” to shift the display of the bearing direction in
compass points and in digital.
- Hold the “COMPASS” button for 2s to enter Calibration mode.
1.2.3 The “SET” button
-
While in normal display, press “SET” button to shift the display of time and date
- While in normal display, hold the “SET” button for 6s to enter energy saving mode: LCD off,
but real time clock is still running. Press any button again to resume normal LCD display mode.
- While in normal display, hold the “SET” button for 2s to enter setting mode
1.2.4 The “HISTORY” button
- While in normal display, press “HISTORY” button to display the history data of barometer or
altitude with the time and date at which these data were recorded, press “AL” to
1
