background image

Back Plate

4 feet / 1.2 meter

(recommended)

TCP/IP PORT (LAN)

POWER ADAPTER 
PORT

RS484 PORT

2. RS485 Network Connection

1. RS485 Single Connection

RX+

RX-

RS232/ RS485 

Data Converter

RX+

RX-

RS232/ RS485 

Data Converter

RS232 PORT

RS232/RS485 SERIAL 
CABLE PORT

USB PORT

Step 1

Determine the Location and Positioning 

of the Installation

•  

Avoid installing the terminals in locations that has contact with 
a strong light source (e.g direct sunlight, spotlight, fluorescent 
light, etc)

• 

Avoid installing the terminals in locations with high moisture or 

condensation levels in the air

• 

The recommended installation height of the terminal from the 
ground is 1.2 meters. 

Step 2

Mounting of Terminals

A. MOUNT ON WALL

•  

After determining the height of the terminal from the ground level 

and having made the relevant marks on the wall, drill the screws 
into the wall to secure the back plate. 

•  

Attach the terminal to the back plate and tighten the screws. Refer 

to Appendix I for dimensions and measurements of installation.

 

Installation Guide

We Make Things Easy

w w w . f i n g e r t e c . c o m

TA100 Series

Fingerprint Time Attendance System

B. FLEXI- KIT

FingerTec offers flexi-kits for all its time attendance models. Attach 
the terminal on the flexi-kit for convenience.

Step 3

Wiring for Power Supply

The power jack is positioned on top of the terminal, labeled 
Power Adapter Port in the below diagram. 

Please use the power adaptor provided in the package or alterna-
tively you can opt for a linear power supply with specifications of 
5VDC 2A. Plug the one point of the power adapter to the terminal 
and the other end to the power outlet. Don’t exceed the recom-
mended voltage or current to avoid damaging the terminal.
 

Reviews: