background image

Thank you

 for your purchase of the 

Finishing Touch (FT) Yes!

 Please follow 

these simple steps to begin eliminating 

unwanted hair easily and painlessly!

1.

 Fully charge unit prior to first use.

(It takes approximately 2.5 hours for unit to 

fully charge)

2.

 Make sure skin is clean and dry.

3.

 Turn switch to ON position. Purple touch activated  

light and green LED will flash.

4.

 Position Trimmer Head against the skin to begin hair 

removal. 

(Touch activated light will automatically turn 

on when in use.) 

5.

 Remove hair by gliding the unit in the opposite 

direction of hair growth for best results.

6.

 For shorter hair or stubble, change to Microfoil 

Head.

7.

 Unit will turn off when not in use. Turn switch to 

OFF position when finished to save battery.

For complete usage please see full instructions inside

• 

WATER WILL DAMAGE THE FT Yes!

 Do not use the unit in the shower, near water, 

or in a damp room. 

• 

DO NOT RINSE THE HEAD UNDER WATER!

 To clean the head, use the brush that 

is included in the package. Make sure the unit is turned off.

• FT Yes should be switched off and stored in a cool dry place when not in use.
• For best performance, it is NOT recommended to use the FT Yes while it is charging.  

MICROFOIL HEAD MAINTENANCE

To maintain optimal performance of the Microfoil Head, from time to time clippings 

trapped in the head may need to be cleaned out. The Microfoil Head is designed for 

easy removal and may be easily cleaned by removing the head from the FT Yes, then 

gently

 tapping the bottom of the head against a hard surface, such as a sink. The 

brush included with the FT Yes may be used to swipe out any remaining clippings. 

Compressed air, such as computer duster, may also be used to blow the clippings 

from the Microfoil

 

Head.

The main body of the FT Yes underneath the head should also be brushed or blown 

clean any time the head is cleaned or changed.

TRIMMER HEAD MAINTENANCE

The performance of the Trimmer Head may be kept at optimal level with regular 

cleaning (as described above) and lubrication of the Trimmer Head. To lubricate the 

Trimmer Head, after cleaning, apply a drop or two of mineral oil (or baby oil) to the 

front edge.   

• Keep out of reach of children.
• Exercise caution when using around eyes.
• The FT Yes contains a Lithium ion battery. DO NOT DISPOSE OF IN FIRE.

Trimmer Head and Microfoil Heads
• Chin
• Underarms
• Knees 
• Ankles
• Arms

• Toes
• Bikini
• Calf
• Thigh

Wayne, NJ 07470

Made in China © 2015 Ideavillage

customerservice@ideavillage.com

FTYMF11132015

This device complies with part 15 of 

the FCC Rules. Operation is subject 

to the following two conditions: (1) 

this device may not cause harmful 

interference, and (2) this device 

must accept any interference 

received, including interference 

that may cause undesired operation.

 

Notice: Changes or modification not 

expressly approved by the party 

responsible for compliance could void the 

user’s authority to operate the equipment.

Reviews: