FT-MB197-DC Installation Guide
Data Controller (DC)
Remote Start for Mercedes
2011 SLS Class
Copyright 2013 Firstech, LLC. | 1
www.compustar.com
888.820.3690
Welcome to the installation guide for the 2011+ SLS Class Mercedes Benz. Please thoroughly review
this manual before installation as there are details that are essential to operation of the vehicle.
Please don’t forget to review the installation manual included with the DC unit.
This manual is intended for experienced installers. Firstech recommends professional installation as
we are not responsible for improper use and/or installation. For questions please call 888-820-3690
Monday through Friday 8 am to 5 pm PST.
Required Parts and Tools
T-20 Torx Driver
•
Right Angle Pick Tool
•
Wire Ties
•
Panel Removal Tool
•
Wire Loom
•
Drill
•
10mm Socket and Ratchet
•
3/4” Drill Bit
•
Mercedes EIS removal tool (Part Number: 639 589 01 07 00)
•
Optional in most installations however makes job much easier. It can
be purchased at your local Mercedes dealer.
DC Control Module
Black Plug
Supplied T-Harness
Valet Switch
After Installation
Before Installation
EIS Key
Cylinder
EIS Key
Cylinder
Wiring Overview
Blue Plug
Blue Plug
White Plug
Prewired KeylessGo Harness
