background image

 detectors are renowned for their quality. 

Each detector is hand crafted in the USA with pride

P E R F O R M A N C E

The worldwide underground utility industry relies on Fisher

®

.

Our instruments are durable, dependable, and locate deeper.

R E P U T A T I O N

Fisher produced the first patented metal detector in 1931. For 

over 80 years, the Fisher logo has been a mark of excellence.

5 - YEAR LIMITED WARRANTY

Register your warranty on-line for a chance to win a

FREE DETECTOR.

For details, visit www.detecting.com

Fisher

®

 believes in the products we produce and backs this 

belief with a 5 year limited warranty. 

Proof of purchase is required to make a claim under this warranty.

 

NOTE TO CUSTOMERS OUTSIDE THE U.S.A.

This warranty may vary in other countries, check with your 

distributor for details.

Warranty does not cover shipping costs.

S E R V I C E

Fisher is committed to providing you, our valued customer, with 

FISHER RESEARCH LABORATORY

1465-H Henry Brennan, El Paso, Texas 79936

Tel 915.225.0333   Fax 915.225.0336

www.fisherlab.com   email:info@fisherlab.com

According to FCC part 15.21 Changes or Modifications made to this device 

not expressly approved by the party responsible for compliance could void 

the user’s authority to operate this equipment.

Gemini-3

Operating Manual

2-Box Metal and Mineral Detector

for Deep Search and Cache Locating

8703520000 

Rev.2 

091813

Q U A L I T Y

Fisher

Summary of Contents for Gemini-3

























Reviews: