!
Legends
Important
Hints
and
tips
1
Aircraft instruction :
When
This
product
is
shipped,
the
default
calibration
has
been
done
,
Please
do
not
modify
it yourself
.
Otherwise
,
we
are
not
responsible
for
warranty
repair
.
We
reserved
the
finally
explanatory
rights
!
latest
version
reference home
page
。
Please visit our offcal website for the new updated
user manual and other information.
www
.
flycker
.
com
User
Manual
Trailblazer Series
Vision-260
Charge the remote control and Battery first,
when opening the package.
2
1
1
1
2
5
3
4
6
8
10
11
1
.
Motor M1-M4 power system. Part 6 will be a description of “how to mount
propellers”
Camera
5
.
8 Video Downlink antenna
Aircraft adjusting parameter micro interface
2
.
3
.
4
.
Video Downlink FM (Frequency Modulation) button is described in detail with reference
to Part 9.
5
.
1
M2
M1
M4
M3
Battery level led lights Displays the battery level
of the remote controller and aircraft battery charge
instructions.
6
.
。
7
.
The color LED lights flashing at tail of aircraft. The information status has cross reference to flashing
Front LED indicator, The Front LED lights show the orientation of the aircraft and random shipments
TF card slot
(
XT60
)
Power input plug
status. Refer to Part 5.
8
.
9.compass
10.Landing gear
11.
Charging indicator
Please
use
power
adapter
Power
Displaying the battery level of the remote
controller
Low
battery
100
%
75
%
50
%
25
%
Full
of
charged
In cold weather, If there's no reaction when you press the ON button,
wait 10 seconds and press it again. please don't pound on the button
of the remote contro
l
7
HEAD
REAR
9
Remote
control instruction
U
SB
Input
voltage
3
.
7
~
5
.
5V
Charger
4
10
5
1
3
2
12
11
6
7
8
9
3
Battery
3
7
3
AIRCRAFT INSTRUCTION
figure2
-
1
Remote
control
instruction
5
if
you
need
Also another USB power output can be use for charging , for example:
mobile phone battery charger and computer.
Aircraft instruction :
figure 1-1)
)
Remote controller and aircraft battery charge instructions.
figure 3-2)
)
This product includes electronic components. Please read this manual carefully before operation of
Dropping it may damage the aircraft. Please, don't modify it by yourself. You can not execute
this product.
any upgrade or maintenance on the product. Contact your dealer or Flycker customer service.
1
.
Long press”turn on/off”button
2
.
Battery level led lights Displays the battery level
of the remote controller. Reference part 3
Cameras/Video record button: Long
press button again to stop recording . Aircraft
took pictures,
Press (three seconds)
short press for video recording. And short
pictures when video recording.
can not take
4
.
Left control stick. Control to take-off and to land. Rotating to the left
or to the right is described in detail in reference to Part 7
Handle
8
.
11
.
Charge
status indicator
12
.
Remote
control Charging interface
GPS
:
When aircraft on GPS mode , it’s smooth flight .ATTI: suitable for
7
.
novice
.
S-ATTI: sensitive respond, but this is not for a novice aircraft user!
9
.
ON
/
OFF
status indicator
10.Hanger for lanyard
6
.
Return home-button. Switch to 'Off' and turn to manual operation. Switch
to "H" and enter Return Home mode. Reference Part 8.
5
.
Right-control stick. Control to fly forward, backward, left and right, is
described in detail in reference to Part 7.
battery.
Please read this warning and rigid adherence to this instruction and
printed word on the battery surface carefully before use the
On occasions of failure generated in violation of thesetting method,
application method and notices as stipulated in the operation
instructions, users take on this responsibility
.
3
.
Important
Legends
This version instruction applied for version number 1.2 vision-260 aircraft.
About version number cheacking method,pls consult offical Flycker service center.
V 1.2
