background image

ASSEMBLY & INSTALLATION INSTRUCTIONS

All instructions must be handed to the user for

safekeeping.

Please note : Except where otherwise stated, all rights, including copy-

right in the text, images and layout of this booklet is owned by Focal

Point Fires plc.  You are not permitted to copy or adapt any of the con-

tent without the prior written permission of Focal Point Fires plc. 

1

Revision B - 03/14

© 2014 Focal Point Fires plc.

Focal Point Fires plc.

Christchurch, Dorset BH23 2BT

Tel: 01202 499330     

Fax: 01202 499326

www.focalpointfires.co.uk

e : sales@focalpointfires.co.uk

Questions or problems with your appliance?

Don’t take it back to the store

just give us a call on 

01202 588601

we’re here to help

lines open between 9am and 5pm, Monday to Friday

MODELS COVERED BY THESE INSTRUCTIONS
F820590 FPFBQ392 WOODTHORPE FIRE SURROUND PINE
F820591 FPFBQ393 WOODTHORPE FIRE SURROUND OAK VENEER
F820592 FPFBQ394 WOODTHORPE FIRE SURROUND WHITE

Summary of Contents for F820590 FPFBQ392

Page 1: ...t Fires plc 1 Revision B 03 14 2014 Focal Point Fires plc Focal Point Fires plc Christchurch Dorset BH23 2BT Tel 01202 499330 Fax 01202 499326 www focalpointfires co uk e sales focalpointfires co uk Questions or problems with your appliance Don t take it back to the store just give us a call on 01202 588601 we re here to help lines open between 9am and 5pm Monday to Friday MODELS COVERED BY THESE ...

Page 2: ...table installation 1 The assembled Fire Surround must be fixed secured to wall 2 The wall must be sturdy and in good repair 3 Some walls require alternative fixings not included 4 When drilling into the wall check for hidden pipes and cables 5 There are two options for construction of this surround A with rebates If you are installing this surround with a gas fire or an electric fire where there i...

Page 3: ...r so that the 3 parts fit together with no gaps Next insert 6 wood screws A in to each leg 4 of which face the front and 2 that face the outside edge When correctly aligned the screws A can be tightened Parts 1 2 3 4 5 Fixings Parts A x 12 PCS 1 2 3 A A STEP 1 STEP 2 If you require a 25mm rebate you will now need to remove the rebates from the surround this can be achieved by removing 3 screws fro...

Page 4: ...ar cleaning of the general appliance A wipe with a dry cloth is normally sufficient DO NOT use abrasive cleaners as they can damage the finish Test on a hidden part before cleaning Clean only in the direction of the grain Regularly check the surround is securely fixed in position 6 0 CLEANING FINISHING 7 0 GUARANTEE TERMS AND CONDITIONS The 3 year guarantee commences from the date of purchase prov...

Reviews: