background image

Order parts online:  

www.follettice.com 

01519719R00

801 Church Lane • Easton, PA 18040, USA

Toll free (877) 612-5086 • +1 (610) 252-7301

www.follettice.com/healthcare

Installation Guide 

Please visit 

https://www.follettice.com/technicaldocuments

  

for the Operation and Service manual for your unit

Follett Edge Series™ 

REFNAT5-SD, REFNAT5-GD Refrige

rators

Welcome to Follett

Follett equipment enjoys a well-deserved reputation for excellent performance, long-term reliability and outstanding 
after-the-sale support. To ensure that this equipment delivers that same degree of service, review this guide 
carefully before you begin your installation. 
Should you need technical help, please call our Technical Service group at (877) 612-5086 or (610) 252-7301.
Please have your model number, serial number and complete and detailed explanation of the problem when 
contacting Technical Service.

Getting Started

After uncrating and removing all packing material, inspect the equipment for concealed shipping damage. All 
freight is to be inspected upon delivery. If visible signs of damage exist, please refuse delivery or sign your delivery 
receipt "damaged." Follett Customer Service must be notified within 48 hours. Wherever possible, please include 
detailed photos of the damage with the original packaging so that we may start the freight claim process.

Summary of Contents for Edge Series

















Reviews: