background image

Operation 

and 

     

Maintenance Manual for 

K.1060 Brushless Micromotor Kit 

FOREDOM

®

    

For Your Safety:  

 

 

Read this Manual before operating your    

Foredom Micromotor Power Tool.
Always wear eye protection while using  

the Foredom Micromotor Handpiece.

HP4-617

Control

HP6-933

Cradle

HP6-606

Foot Control

H.MH-160

Handpiece

Contact Information

 

For more information on Foredom machines, handpieces or ac ces so ries, contact  

your local dealer. When no local dealer is available, write, call, fax, or email:  

 

Foredom Electric Company  

16 Stony Hill Rd, Bethel, CT 06801 

Tel: 203-792-8622 Fax: 203-796-7861 

Email customerservice@blackstoneind.com 

Visit our website: 

www.foredom.net

 

F-1230 n    9/18        

 

 

 

 

                Printed in U.S.A.

 

Do Not  

Submerge the 

Handpiece  

in Liquids!

Limited Warranty

Foredom warrants its product to be free of defects in material or work man ship for a period of 

two years after purchase. Blackstone Industries, LLC d/b/a The Foredom Electric Company war-

rants, to the original purchaser only, that its products will be free from defects in material or 

workmanship for the applicable period of time indicated above following the purchase date. 

During the warranty period, the defective product will be repaired or replaced without charge or, 

at our sole option, the purchase price will be refunded. This warranty does not cover damage 

caused in transit or by accident, misuse or ordinary wear.
ALL IMPLIED WARRANTIES INCLUDING, WITHOUT LIMITATION, IMPLIED WARRANTIES OF 

FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY, ARE LIMITED IN DURATION 

TO THE APPLICABLE WARRANTY PERIOD. IN NO EVENT WILL WE BE LIABLE FOR ANY 

INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow limitations on how 

long an implied warranty lasts or the exclusion or limitation of incidental or consequential dam-

ages, so the above limitations or exclusion may not apply to you. At our sole option, repair, 

replacement or refund will be made if the product is returned postage prepaid to:

  Foredom Electric Company  

 

16 Stony Hill Road, Bethel, CT 06801

All warranty repairs must be done at the factory at the address above. We will not pay any ship-

ping or transportation charges. This warranty only covers the original purchaser of the product. 

Proof of pur chase may be requested. Some states do not allow limitations on how long an 

implied warranty lasts, so the above imitation may not apply to you. This warranty gives you 

specific legal rights, and you may also have other rights which vary from state to state.

Repair Services

Authorized repair service is available at the  

Foredom factory in Bethel, CT. Send items for 

repair to the factory marked:

“Attn: Repair Depart ment”  

Foredom Electric Co.  

16 Stony Hill Road 

Bethel, CT 06801 

Enclose the item(s), a packing list, your 

address, phone number, email address and a 

description of the problem or repairs 

required. Estimates of repair cost will be 

made upon request. If the cost (labor plus 

parts) is more than fifty percent of the price 

for a new replacement we will contact you 

and recommend a trade-in offer. 

Please retain your proof of purchase for 

warranty repairs.

www.foredom.net

 

Summary of Contents for K.1060

Page 1: ...F FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY ARE LIMITED IN DURATION TO THE APPLICABLE WARRANTY PERIOD IN NO EVENT WILL WE BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential dam ages so the above limitations or exclusion may not apply to you At our s...

Page 2: ...ool Do not wear items such as neckties necklaces or bracelets when operating power tools Secure or tie back long hair NEVER turn on or start the Handpiece while collet is in open unlocked position This can damage the hand piece Always operate and store it with a bur or other accessory in the chuck and with the chuck in the closed position DO NOT operate the handpiece in the presence of any flammab...

Page 3: ...iate position The spindle is locked and will not turn This will damage the motor Fuse Protection 1 To change a fuse Unplug the power cord from the AC receptacle in the back of the control box to expose the Fuse Compartment 2 Use the blade of a small screwdriver in the slot of the fuse holder and gently pry outward The active fuse is in the back of the holder and a spare fuse is in the front compar...

Page 4: ...on the metal ring lines up with the Unlock symbol Be sure a bur is in the collet to avoid damaging the collet Next Use the rounded triangle hole in the Collet Wrench to un thread the collet counter clockwise 4 Once the collet is loosened unthread it completely by hand Unthread Tighten Collet removed Nosecone Wrench Nosecone Wrench Unlock Unlock 5 continued Tighten with the rounded triangle hole in...

Reviews: