background image

WARNING

!

CHOKING HAZARD - 

Small parts

and batteries,Not for children
Use with adult supervision only

Wireless Key Finder

User Manual

Overview

This wireless key finder can help you find your belongings that  frequently lost, like keys, remotes, purse, glasses, 
canes, umbrella etc. Just press the button on the transmitter, the beeping sound will lead you to your lost belongings.

Diagram

Transmitter

Transmit button

Base

Receivers

Main features

Beautiful design and simple to you

Transmitter with 4/5/6 buttons and each button can pair with multiple receivers

Up to 80dB beeping sound and 30m wireless range

Low consumption and long standby time

Transmitters and receivers pairing

1.Turn on receiver
2.Press any button on the transmitter
Note:
(1)The receiver will keep beeping when you turn it on and stop until it is paired with the transmitter
(2)Each button on the transmitter can be linked with multiple receivers.
(3)Please pair the receivers and transmitter again after you turned the transmitter off and on.

How to use it?

1.Attach the receivers to your frequently lost items
2.Press any button on the transmitter, the corresponding receiver will beep if it is within the range of transmitter.
3.The receiver will start beeping once it received signal from transmitter,If no beep is heard, change another place 
where your lost items would be and press again

Battery installation/replacement

Transmitter: requires one CR2032 cell battery

1.Remove the battery door from the back of transmitter
2.Install the battery according to the (+) and (-)marks inside the battery compartment
3.Push the battery door back in place

(1)

(2)

(3)

(1)

(2)

(3)

Receiver: requires one CR2032 cell battery

1.Insert a flat-bladed screwdriver into the slot on the receiver, carefully lever the cover and base apart.
2.Put the battery into the battery compartment, making sure the “+”side of the battery is facing upwards 
3.Replace the cover back in place

Note:If the battery is low, the indicator on transmitter will become dimmer and receiver will beep lowly

Specifications

Dimension:(transmitter)4.7(L)*1.8(W)*0.6(H)inch;(receiver)1.5(d)*0.2(H)inch
Batteries: (transmitter):1 x CR2032(included);(receiver):1 x CR2032(included)
Sound: 80dB
Wireless range: 100ft(open space)
Wireless frequency: 433.92MHz
Standby time:(transmitter):5 years;(receiver):6 month

Receiver

On/Off switch

Reviews: