AUTOMATIC & MANUAL TRANSMISSION
REMOTE STARTER & ALARM
PROGRAMMING REMOTE TRANSMITTER(S)
WIRING / CONNECTION GUIDE
The system can learn up to a maxi-
mum of 4 transmitters.
Any transmitters can be stored in
more than 1 memory slot.
When a 5th transmitter is learned
the 1st remote is erased (FIFO).
Red Black White Black
Blue
Blue
Programming LED
(4-pin)
Antenna
(4-pin)
RS-232 Data-Link
(2pin)
Valet/Programming
Button
Shock Sensor
(3-pin)
(4-pin)
Antenna
White
#14
Brown
#18
Red
#14
Red
#14
Red
#22
Power
Power
(utility)
Power
Parklights
Ign/Acc/Start
Tachometer
Foot-Brake
Door Pin
Pos
Trunk/Hatch (open)
Lock
Starter
Parklight
(-) while running
Purple
White
Orange
White/Black
Dk. Blue
White/Red
Yellow/Red
Yellow/Black
Brown/White
Lt. Green
Lt. Green/Black
24
8
Ignition
Starter
Ignition Switch
Aux.1
Aux.2
INPUT
OUTPUT
Arm
~
Cut loop for automatic
transmission mode.
External LED
(2-pin)
Yellow
#14
Orange
#14
Pink
#14
Black
#18
Starter
Accessory
Ignition
Ground
Hood Pin
E-Brake
Door Pin Neg.
Trunk/Hatch Pin
Starter Kill
Unlock
Disarm
Ignition
Accessory
Horn
Siren
Aux.IN
Grey
Brown
Dk. Green
Pink
Yellow
White/Green
Yellow/Green
Pink/Black
Orange/Black
Red/Black
Red
Purple/White
1
1
To Vehicle
To Vehicle
Starter-Kill / Anti-Grind Relay
See programming guide, Function #10
Neutral Safety Switch for manual transmission vehicle
Optional Relay
Not Use
Lt.Blue
QUICK
INSTALLATION GUIDE
RF751W
COPYRIGHT © 2015-2016, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED MADE IN CANADA REV.:20161011
WIRING / CONNECTION GUIDE
PROGRAMMING REMOTE TRANSMITTER(S)
The system can learn up to a maxi-
mum of 4 transmitters.
Any transmitters can be stored in
more than 1 memory slot.
When a 5th transmitter is learned
the 1st remote is erased (FIFO).
STEP
1
STEP
2
STEP
3
STEP
4
STEP
5
STEP
6
x5
x1
Turn the
Ignition ON.
Press and hold the valet
switch until the parking
lights turn ON, the horn/
siren will chirp.
Press and release the valet
switch fi ve time.
The parking lights will fl ash
and the horn/siren will chirp
each time to confi rm.
Press and release the
brake pedal once.
On each Transmitter press and release the
button then press and release the
button. The park-lights will fl ash to confi rm.
Turn the Ignition OFF
to exit programming.
1
3
2
4
ONE
ONE
E400
ONE
ONE
AX-ST
GUIDE # 28481
