AUTOMATIC & MANUAL TRANSMISSION
REMOTE STARTER & ALARM
PROGRAMMING REMOTE TRANSMITTER(S)
WIRING / CONNECTION GUIDE
The system can learn up to a maxi-
mum of 4 transmitters.
Any transmitters can be stored in
more than 1 memory slot.
When a 5th transmitter is learned
the 1st remote is erased (FIFO).
Red Black White Black
Blue
Blue
Programming LED
(4-pin)
Antenna
(4-pin)
RS-232 Data-Link
(2pin)
Valet/Programming
Button
Shock Sensor
(3-pin)
(4-pin)
Antenna
White
#14
Brown
#18
Red
#14
Red
#14
Red
#22
Power
Power
(utility)
Power
Parklights
Ign/Acc/Start
Tachometer
Foot-Brake
Door Pin
Pos
Trunk/Hatch (open)
Lock
Starter
Parklight
(-) while running
Purple
White
Orange
White/Black
Dk. Blue
White/Red
Yellow/Red
Yellow/Black
Brown/White
Lt. Green
Lt. Green/Black
24
8
Ignition
Starter
Ignition Switch
Aux.1
Aux.2
INPUT
OUTPUT
Arm
~
Cut loop for automatic
transmission mode.
External LED
(2-pin)
Yellow
#14
Orange
#14
Pink
#14
Black
#18
Starter
Accessory
Ignition
Ground
Hood Pin
E-Brake
Door Pin Neg.
Trunk/Hatch Pin
Starter Kill
Unlock
Disarm
Ignition
Accessory
Horn
Siren
Aux.IN
Grey
Brown
Dk. Green
Pink
Yellow
White/Green
Yellow/Green
Pink/Black
Orange/Black
Red/Black
Red
Purple/White
1
1
To Vehicle
To Vehicle
Starter-Kill / Anti-Grind Relay
See programming guide, Function #10
Neutral Safety Switch for manual transmission vehicle
Optional Relay
Not Use
Lt.Blue
VERSION
LOGICIELLE
DU
DÉMARREUR
À DISTANCE
1. [21]
& MORE
QUICK
INSTALLATION GUIDE
COPYRIGHT © 2015-2016, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED MADE IN CANADA REV.:20170323
WIRING / CONNECTION GUIDE
PROGRAMMING REMOTE TRANSMITTER(S)
The system can learn up to a maxi-
mum of 4 transmitters.
Any transmitters can be stored in
more than 1 memory slot.
When a 5th transmitter is learned
the 1st remote is erased (FIFO).
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
WITH IGNITION SWITCH
Turn the Ignition
OFF.
Turn the
Ignition ON.
FMH
2-W
The LED will
turns ON
x4
Press and
release the
brake pedal
four times.
FMH
2-W
Turn the
Ignition
ON.
WITH V
ALET SWITCH
Press and hold
the valet switch
until the park-
ing lights turn
ON, the horn/
siren will chirp.
x5
Press and release the valet switch fi ve
time.
The parking lights will fl ash and the
horn/siren will chirp each time to
confi rm.
x1
Press and re-
lease the brake
pedal once.
The LED
will fl ash
rapidly.
On each Transmitter press
and release the
button
then press and release the
button. The LED will
stop fl ashing confi rming
programming.
Turn the Ignition
OFF to exit
programming.
1
3
2
4
ONE
ONE
E400
ONE
ONE
RF642W
GUIDE # 32461