Sport Digital UPC-531
Time and Calendar Setting
1. Press and hold pusher C for 3 seconds to enter setting mode. Seconds will begin flashing.
2. Press pusher A to adjust digit.
3. Press pushers D and E to adjust digits up/down.
4. Press pusher C to return to Time and Calendar Mode.
5. Press pusher A to enter T2 Mode.
T2 Settings are exactly the same as Time and Calendar Settings.
Chronograph Stopwatch
1. Press pusher E to start/stop the chronograph.
2. Press pusher D to reset to zero.
Lap Counting
1. Press pusher D while chronograph is running. (Will record up to 8 laps.)
2. Press pusher E to finalize timing.
3. Press pusher C to recall laps.
4. Press pusher D to reset to zero.
5. Press pusher A to enter TR Mode.
Count Down/Up Timer Setting
Count Up
1. With timer at zero, press pusher E to start counting.
2. Press pusher E to stop.
3. Press pusher D to reset to zero.
Count Down
1. Press and hold pusher C for 3 seconds to enter Setting Mode. Seconds will begin flashing.
2. Press pusher D and E to adjust digits up/down.
3. Press pusher A to select next digit.
4. Press pusher C to return to Timer Mode.
5. Press pusher E to start/stop timer.
6. Press pusher D to reset.
7. Press pusher A to enter AL Mode.
Alarm Setting (4 alarms)
Use E to turn hourly chime and alarm chime on/off. Hourly chime allows the watch to chime at every hour. Alarm chime turns alarm on/off.
1. Press and hold pusher C for 3 seconds to enter Setting Mode. Minutes will begin flashing.
2. Press pusher D and E to adjust digits up/down.
3. Press pusher A to select next digit.
4. Press pusher C to return to Alarm Mode.
5. Press pusher D to scroll through alarms.
6. Press pusher A to enter Time and Calendar Mode.
D
E
A
C
B
