FoxESS Smart WIFI V2.0
User Manual
9SGXZ=O,O
Quick Installation Guide
This guide describes how to install the Smart WiFi & APP. Including APP
download, register an account, create PV plant. In order to prevent
improper operation before use, please carefully read this manual.
9SGXZ=O,O
Ͱ
Step 1 :
Plug the Smart WiFi 2.0 into WiFi/GPRS port
under the bottom (underside) of the inverter.
Step 2 :
Tighten the nut clockwise as following.
WiFi Stick Installation
1
9SGXZ=O,O
ͱ
Step 3 :
Power on the inverter (in accordance with the
start-up procedure detailed in the inverter
installation manual).
1
Scan the QR Code below to download and
install the FoxCloud App on your smart phone.
App Installation
1
2
9SGXZ=O,O
Ͳ
For Smartphone Users
：
Step 2 :
After connecting successfully. Open any
browser and enter
‘
192.168.1.1
’
on the
address bar on Top.
Configuration
1
3
Step 1 :
Connect your mobile
device with Smart WiFi.
The SSID of the Smart WiFi
is
‘
W-xxxxx
’
and the
password is
‘
mtmt2020
’
.
9SGXZ=O,O
Quick Installation Guide
This guide describes how to install the Smart WiFi & APP. Including APP
download, register an account, create PV plant. In order to prevent
improper operation before use, please carefully read this manual.
9SGXZ=O,O
Ͱ
Step 1 :
Plug the Smart WiFi 2.0 into WiFi/GPRS port
under the bottom (underside) of the inverter.
Step 2 :
Tighten the nut clockwise as following.
WiFi Stick Installation
1
9SGXZ=O,O
ͱ
Step 3 :
Power on the inverter (in accordance with the
start-up procedure detailed in the inverter
installation manual).
1
Scan the QR Code below to download and
install the FoxCloud App on your smart phone.
App Installation
1
2
9SGXZ=O,O
Ͳ
For Smartphone Users
：
Step 2 :
After connecting successfully. Open any
browser and enter
‘
192.168.1.1
’
on the
address bar on Top.
Configuration
1
3
Step 1 :
Connect your mobile
device with Smart WiFi.
The SSID of the Smart WiFi
is
‘
W-xxxxx
’
and the
password is
‘
mtmt2020
’
.
9SGXZ=O,O
Quick Installation Guide
This guide describes how to install the Smart WiFi & APP. Including APP
download, register an account, create PV plant. In order to prevent
improper operation before use, please carefully read this manual.
9SGXZ=O,O
Ͱ
Step 1 :
Plug the Smart WiFi 2.0 into WiFi/GPRS port
under the bottom (underside) of the inverter.
Step 2 :
Tighten the nut clockwise as following.
WiFi Stick Installation
1
9SGXZ=O,O
ͱ
Step 3 :
Power on the inverter (in accordance with the
start-up procedure detailed in the inverter
installation manual).
1
Scan the QR Code below to download and
install the FoxCloud App on your smart phone.
App Installation
1
2
9SGXZ=O,O
Ͳ
For Smartphone Users
：
Step 2 :
After connecting successfully. Open any
browser and enter
‘
192.168.1.1
’
on the
address bar on Top.
Configuration
1
3
Step 1 :
Connect your mobile
device with Smart WiFi.
The SSID of the Smart WiFi
is
‘
W-xxxxx
’
and the
password is
‘
mtmt2020
’
.
9SGXZ=O,O
Quick Installation Guide
This guide describes how to install the Smart WiFi & APP. Including APP
download, register an account, create PV plant. In order to prevent
improper operation before use, please carefully read this manual.
9SGXZ=O,O
Ͱ
Step 1 :
Plug the Smart WiFi 2.0 into WiFi/GPRS port
under the bottom (underside) of the inverter.
Step 2 :
Tighten the nut clockwise as following.
WiFi Stick Installation
1
9SGXZ=O,O
ͱ
Step 3 :
Power on the inverter (in accordance with the
start-up procedure detailed in the inverter
installation manual).
1
Scan the QR Code below to download and
install the FoxCloud App on your smart phone.
App Installation
1
2
9SGXZ=O,O
Ͳ
For Smartphone Users
：
Step 2 :
After connecting successfully. Open any
browser and enter
‘
192.168.1.1
’
on the
address bar on Top.
Configuration
1
3
Step 1 :
Connect your mobile
device with Smart WiFi.
The SSID of the Smart WiFi
is
‘
W-xxxxx
’
and the
password is
‘
mtmt2020
’
.
9SGXZ=O,O
Quick Installation Guide
This guide describes how to install the Smart WiFi & APP. Including APP
download, register an account, create PV plant. In order to prevent
improper operation before use, please carefully read this manual.
9SGXZ=O,O
Ͱ
Step 1 :
Plug the Smart WiFi 2.0 into WiFi/GPRS port
under the bottom (underside) of the inverter.
Step 2 :
Tighten the nut clockwise as following.
WiFi Stick Installation
1
9SGXZ=O,O
ͱ
Step 3 :
Power on the inverter (in accordance with the
start-up procedure detailed in the inverter
installation manual).
1
Scan the QR Code below to download and
install the FoxCloud App on your smart phone.
App Installation
1
2
9SGXZ=O,O
Ͳ
For Smartphone Users
：
Step 2 :
After connecting successfully. Open any
browser and enter
‘
192.168.1.1
’
on the
address bar on Top.
Configuration
1
3
Step 1 :
Connect your mobile
device with Smart WiFi.
The SSID of the Smart WiFi
is
‘
W-xxxxx
’
and the
password is
‘
mtmt2020
’
.
