RELAY COACH BLE
INSTRUCTION FOR USE
THE BLUETOOTH RELAY COACH
OF FREELAP AUTOMATIC TIMING SYSTEM
TECHNICAL SHEET
• Dimensions: 155 x 95 x 35 mm
• Weight: 270g
• Compatibility: FxChip, LED Display
• Technology: Bluetooth (BLE)
• Bluetooth detection distance: up to 50 meters (depends on the mobile
device)
• Memory: 6000 Laps
• Battery: 3.7V 5Ah LiPo / Automatic switch off fonction when not in use +
Low battery indicator / Easily recharge it using a USB cable (charging time
10 hours)
• Battery life: 80 hours
• Water resistance: 3ATM
• Operating temperatures: -20°C to +50°C
MEMORY
Your Relay Coach BLE has a memory of 6’000 Laps. If you have not used
the MyFreelap app on site, you can download the data collected during
the training later (so up to 6’000 Laps).
TECHNICAL SUPPORT
Our FAQ (Frequently Asked Questions), as well as other manuals and user
guides, can be found on our website at:
http://www.freelap.ch/support/
If you cannot find the answers to your questions, please contact your
Freelap dealer. Find the list of Freelap dealers at:
http://www.freelap.ch/freelap-contact/
AFTER-SALES SERVICE & WARRANTY
Your Relay Coach BLE is guaranteed 2 years. If you have any questions
or if you need assistance with your device, please contact your Freelap
dealer.
MADE BY FREELAP SA
Av. D.-Jeanrichard 2A
CH-2114 Fleurier – Switzerland
+41 32 861 52 42 - www.freelap.ch
Follow Freelap on &
www.freelap.ch
> Recharging the battery:
- Insert the USB cable into the USB port under your Relay Coach BLE case,
on the right. Then connect it to the power cable (supplied with adapter).
- It is recommended to make complete charges (charging time: 10h).
- When the battery is fully charged, the device has a battery life of 80h.
The “PWR / CHR” led flashes green to indicate that the battery is full.
By default, your Relay Coach BLE automatically turns off after 1 hour of
inactivity, in order to save the battery. Thanks to the Freelap Device
Manager software you can choose to change this delay to 5h, 10h, 18h or
24h of inactivity, or to completely disable the automatic shutdown
function.
UPDATE AND SETTINGS
• To update your Freelap device: go to Freelap Device Manager app
from your mobile device (free download / see the corresponding user
manual) / OR use the Freelap Device Manager software from your
computer and connect it to your Freelap device via USB.
• Freelap Device Manager also allows you to view information about
your device and change its settings.