OPERATING INSTRUCTIONS
3. Pretreat stains and heavy soil.
4. Add the measured amount of detergent
to wash tub.
5. If desired, add diluted liquid bleach to
Bleach Dispenser.
6. Add laundry load to wash tub.
7. If desired, add liquid fabric softener to
the Fabric Softener Dispenser.
8. Set cycle selector and washer controls
according to type, size, and soil level of
each load.
9. Close lid and pull cycle selector knob to
start washer.
10.Remove items at end of cycle.
Wait about
1 minute for safety lid lock to release.
Before Operating Your Washer
Read your washer Owner's Guide.
It has
important safety and warranty information. It
also has many suggestions for best washing
results.
To reduce the risk of fire, electric
shock, or injury to persons, read the IMPORTANT
SAFETY INSTRUCTIONS in your washer
Owner's Guide before operating this appliance.
Operating Steps
Read Washing Procedures in your Owner's
Guide.
It explains these operating steps in
detail.
1. Sort laundry into loads that can be
washed together.
2. Prepare items for washing.
FWSC235RF
Cycle Selection
Always follow instructions on fabric care labels.
The Regular, Perm Press and Knits & Delicates
cycles provide a spray rinse during the first
spin, followed by a deep rinse and final spin.
Regular Cycle
Provides up to 15 minutes of wash agitation
for most fabrics.
Perm Press Cycle
Provides up to 12 minutes of wash agitation
for cottons and blends with a no-iron finish.
Knits & Delicates Cycle
Provides 8 minutes of wash/pause agitation
for the gentle care of knit and delicate items.
Always set the Knits & Delicates cycle to begin
at the START position.
P/N 131736300 (9807)
Printed in U.S.A.
(continued, reverse side)
