background image

OPERATING INSTRUCTIONS

Printed in U.S.A.

Read Drying Procedures in your Owner's Guide.

It explains these operating steps in detail.

 1. Prepare items for drying.

Operating Steps

P/N 134067700 (0108)

Versión en español

Si desea obtener una copia en español de estas
Instrucciones de Funcionamiento, sírvase escribir a la
dirección que se incluye a continuación.
Solicite la P/N 131924900.

Spanish Owner's Guides
Electrolux Home Products
P. O. Box 212378
Augusta, Georgia  30917

settings may be used with any cycle setting. The 

AIR

FLUFF-NO HEAT

 setting can be used only in the Timed

Dry cycle.

AIR FLUFF-NO HEAT 

setting tumbles the load without

heat. Use Air Fluff to freshen clothing, pillows or
blankets, or to dust draperies.

Cycle Selection

Turn cycle selector clockwise to desired cycle and
setting.

Each cycle ends with a cool down period. The heat
automatically turns off and the load continues to tumble
during the cool down period. This reduces wrinkling and
makes items easier to handle during unloading.

Drying time varies depending on size and dampness of
load, weight and fabric type. Room temperature and
humidity, type of installation and electrical voltage or
gas pressure can also affect drying time.

Cycle Selection 

(continued)

2. Check that lint screen is clean and in place.
3. Load the dryer. 

If desired, add a dryer fabric

softener sheet.

4. Close the dryer door.
5. Set Dry Temperature control.  Select PRESS

SAVER if desired.

6. Turn cycle selector clockwise to desired setting.
7. Start dryer. 

Push the Start button and hold for 1-

2 seconds, or turn the Turn to Start control
clockwise to ON. Hold for 1-2 seconds and release.

8. A signal will sound toward the end of the cool

down period when the End of Cycle Signal is

ON.

9. Remove items immediately and hang or fold.

10. Clean lint screen after every load.

Temperature Selection

Always follow directions on fabric care labels.

 

To avoid fire hazard, do not use heat

to dry items containing feathers or down, foam rubber,
plastics, or similarly textured, rubber-like materials.
Use Air Fluff-No Heat setting only.
The

 REGULAR-HIGH HEAT, PERM PRESS-MEDIUM

HEAT

, and 

KNITS/DELICATES-LOW HEAT 

temperature

Before Operating Your Dryer

Read your dryer Owner's Guide. 

It has important

safety and warranty information. It also has many
suggestions for best drying results.

  To reduce the risk of fire, electric

shock, or injury to persons, read the IMPORTANT
SAFETY INSTRUCTIONS in your dryer owner's guide
before operating this appliance.

PERM PRESS/COLORS

MEDIUM HEAT

REGULAR/WHITES

HIGH HEAT

KNITS/DELICATES

LOW HEAT

AIR FLUFF

NO HEAT

DRY TEMPERATURE

END OF CYCLE

ON

OFF

PRESS SAVER

YES

NO

START

AUTO PERM PRESS/

COLORS

PRESS SAVER

TIMED DRY

AUTO KNITS/

DELICATES

AUTO REGULAR/

WHITES

PRESS SAVER

COOL

DOWN

LESS

NORMAL DRY

MORE

MORE

NORMAL DRY

LESS

COOL

DOWN

MORE

NORMAL

DRY

LESS

COOL

DOWN

ON

10

20

30

40

50

60

Summary of Contents for GLER642CAS3

Page 1: ...abric softener sheet 4 Close the dryer door 5 Set Dry Temperature control Select PRESS SAVER if desired 6 Turn cycle selector clockwise to desired setting 7 Start dryer Push the Start button and hold for 1 2 seconds or turn the Turn to Start control clockwisetoON Holdfor1 2secondsandrelease 8 A signal will sound toward the end of the cool down period when the End of Cycle Signal is ON 9 Remove ite...

Page 2: ...is suggested for permanent press items Initially set cycle selector on NORMAL DRY For items requiring more drying time set cycle selector on MORE Foritemsrequiringlessdryingtime setcycleselector on LESS A signal will sound toward the end of the cool down period when the Cycle Signal is ON If the Press Saver option is turned to YES the cycle selector will advance to the Press Saver setting Unheated...

Page 3: ...quement et le culbutage se poursuit pendant le période de refroidissement Cette étape réduit le froissement et rend les articles plus faciles à manipuler pendant le déchargement Le temps de séchage varie en fonction de la taille de la brassée du degré d humidité et des types de tissus La température de la pièce l humidité ambiante le type d installation et l alimentation électrique ou la pression ...

Page 4: ...edium Heat Chaleur moyenne est recommandé pour les tissus à pli permanent Régler le sélecteur de cycle sur NORMAL DRY Séchage normal Pourlesarticlesquidoiventêtreséchéspluslongtemps régler le sélecteur de cycle sur MORE Séchage long Pourlesarticlesquisèchentplusrapidement réglerlesélecteur de cycle sur LESS Séchage court Lorsque l indicateur Press Saver Garde Pli est en fonction lesélecteurdecycle...

Reviews: