FDG-232R
INSTRUCTIONS
from
Laser Levels Online
www.laser-level.co.uk
Tel: 01246 269 777
Thank you for purchasing the
FDG-232R
red beam, laser level kit.
These instructions are intended to explain the quick basics to operating this
equipment. If you need any more information, or the unit requires calibration
or repair, then please contact our Service Dept on tel 01246 269 777 or
fax 01246 260 007. Email: sales@laser-level.co.uk We are here to help.
Power source:
The FDG-232R accepts 4pc x type AA rechargeable or alkaline (supplied)
batteries. Ensure correct polarity when fitting. Rechargeable batteries have to
be charged outside the laser instrument. There is no provision for charging
within the laser.
Positioning the Laser:
Mount the FDG-232R on a generally level, firm surface or a 1/4” threaded
laser accessory eg. a Floor to Ceiling Pillar or Tripod. You may need to use an
adapter. To operate correctly, this surface must be /-4 deg of true
horizontal.
If the laser alarms (ie. beeps every second), then it is outside its levelling
range.
1
