1
Smart Combustible Gas Detector
Cloud Interconnection
Funtin Home AirRadio WIFI Smart Natural Gas Detector R2 is an
automatic high-sensitivity gas leak alarm. When the natural gas (methane)
leak occurs it will automatically aissue a 70dB alarm sound, and in the first
time through the WIFI signal to send a leak warning to your phone APP(If
used with the solenoid valve, it will issue a warning at the same time to
control the solenoid valve
and cut off the gas source) to protect your
family's life and property safety. When the leak warning is eliminated, it will
automatically return to the detection state.
Connect with mobile App. Interact with the third party equipment.
Calculate the risk of leakage base on the analysis of the historical data.
Intelligent Prediction
Triple Alarm
Visual & Audible alarm given from the device;
Alarm information pushed by internet;
Alert Message sent to bounded mobile phone.
Instruction of LED Status Strip
The ring indicator keep emitting with green light- Normal working status
Electromagnetic valve
Self-testbutton
RingIndicator
Network connection key
Power cord
Expire indicator
正常
报警
故障
失效
Buzzer
WIFIindicator
The ring indicator blinks with yellow light- Fault status
The ring indicator blinks with red light-Alarm Status
Network connection instruction
Working without WIFI
Applicabe in the environment without WIFI
.
Plug in the deveice and it will transmit an audible and visual signals
when gas leak occurs.
Working with WIFI
Applicable in the environment with WIFI
.
Plug in the device and scan the QR
code to dowmload the APP
.
According to the instruction of your
mobile App and the indicator of the
detector to finish the network
connection.
According to the instruction of your mobile App and the
indicator of the detector to finish the network connection.
Remote monitoring and account management
1) Start the mobile App and check the connected device list to monitor the
detecting data of your home. Once gas leaks, the device will give off visual
and audible alarm and also send the alarm information to your mobile App.
2) The device could be bound with more than one mobile App and add
multiple phone numbers for emergency. When leakage occurs, the cloud
will send message to the bound mobile phones.
Special Conditions
1) When Installation location changed, press network connection key and
hold on for 5 seconds to active the reset function. And adapt the new
network refer to networking instruction.
2) For reselling the device, please delete the device information on mobile
App.
Button introduction
Self-test button is used to detect whether the alarm function is normal and
to reset the device. Press the self-test butoon, the ring indicator light
displays red, green and yellow. At the same time, the buzzer beeps.
Self-test function
Press the network connection key and hold on for 5s to reset the network.
Network resetting function
Websit :
https://www.funtintech.com
Tel :
86 13760453400
eMail:
support@funtin.cn
Address :
B201 4F
Niulanqian Build
Baoan District
Shenzhen, China
Zip :
518000
Welcome to
follow our
facebook:
https://www
.facebook.com/funtintech,
any questions
can leave
a message
to tell
us,
we will
reply you
ASAP.
THANK YOU
FOR READING
:)
CONTACT
Funtin Home AirRadio WIFI Smart Natural Gas Detector
R2