background image

lights will show here

lights will show here

USB Flash Drive Hidden Camera Manual

Step 1:

 Press and hold the on/off button until the device 

vibrates and the light glows purple.

Step 2:

 The device is now on and in standby mode and light 

will glow red.

Step 3:

 To turn off the device, hold the on/off button until the 

device vibrates and the red light blinks 3 times then turns off.
*Note: Press the camera/photo and on/off button at the 

same time to reset it.

How to Turn On/Off Your Device

How to Charge Your Device

Step 1:

Plug the USB into the USB port on your 

computer. This device is compatible with 

both PC and Mac operating systems.

The light will glow blue while the device 

is charging. When the device is fully 

charged, the light will flash red.

Step 2a:

If you have a USB wall charger, you can 

charge the device in a wall outlet.

*Note: 

This product does not come with one.

Step 2b:

plug here

USB Key

Step 1:

 Once in standby mode (light will be glowing red) 

press and hold the camera/photo button for 3 seconds. 

Step 2:

 The device will then vibrate twice and the red light 

will flash 3 times. After the third flash the camera will 

begin recording immediately.

Step 3: 

To stop recording, press the camera/photo button once. 

Step 4:

 The device will stop and save your current recording 

and return to standby mode (light will be glowing red).

How to Record Video

Step 1:

 Once in standby mode (light will be glowing red) 

press the camera/photo button once.

Step 2: 

The light will turn blue and the device will vibrate 

once indicating the picture was taken.

Step 3: 

The light will then return to standby mode and the 

light will glow red again.

How to Take a Photo

Step 1:

 Once in standby mode (light will be glowing red) 

press the motion detection button once.

Step 2: 

The device will vibrate 3 times and the light will 

flash purple 4 times.

Step 3: 

Now whenever there is movement in front of the 

camera, it will automatically start recording.

Step 4:

 Press the motion detection button once again to 

exit motion detection mode, and return to standby mode 

(light will glow red again).

How to Record Motion Detected Video

A

B

C

D

E

F

G

H

I

!

A. Camera Lens 

F.  Camera/Photo Button

B. Microphone 

G. Indicator Light

C. USB 

H. Motion Detection Button

D. Micro SD Card Slot 

I. Cover

E. On/Off Button

!

!

!

!

!

!

!

!

!

!

!

All manuals and user guides at all-guides.com

all-guides.com

Reviews: