1
Phone: (866) 205-‐5268 Fax: (813) 247-‐6200
Email: Sales@GamerModz.Com
4951 E. Adamo Dr. Ste. 238, Tampa, FL 33605
PS3 Rapid Fire X-‐2 (Version 2.0)
The GamerModz – SPS-‐X2 ® – has 1 programmable mode that can be configured for the
trigger or your choice, dual-‐trigger mode, and different shots per second. This mod is 100%
undetectable and fully adjustable.
Congratulations on your new Rapid Fire Controller! Please read through these instructions before
programming your controller so you know what to do. Turn on your controller and the 4th LED will flash
quickly, followed by 5 slow flashes. Do not touch any of the buttons until the 4
th
LED light sequence finishes.
Now your controller is ready to go.
There is one mode that you can program and with two options. You can choose which trigger you want to
have rapid-‐fire on (R1, R2, L1, L2), and you can adjust the shots per second.
To program your mode, hold down one of the trigger buttons, (R1, R2, L1, or L2) and press up on the d-‐pad
the once.
Hold down one of the triggers and press right on the d-‐pad. The 4th LED will flash 5 times then turn off. At
this point you can release the buttons and you are now in Program Mode.
The first step is selecting a trigger button for rapid fire. Once you choose a button (R1, R2, L1, or L2) tap it
then press right on the d-‐pad and the 4th LED will flash according to the button you’ve selected. R1-‐ 1 flash,
R2-‐ 2 flashes, L1-‐3 flashes, L2-‐ 4 flashes.
After selecting your trigger button, the next step your controller is waiting to program is the amount of
shots per second you would like to fire. To adjust the shots per second press up or down on the d-‐pad. One
press equals a shot per second. For example, pressing up 7 times will give you 7 shots per second. Test your
shots per second by pressing the trigger you selected for rapid fire. If your weapon begins to break-‐up, you
need to increase or decrease your shots per second.
Once you’ve programmed your shots per second, press right on d-‐pad and the 4th LED will flash the
corresponding number of times. For example, if you chose 7 shots per second, it will flash 7 times. At this
point the LED will pause, then flash a solid color signaling your mode is programmed.
To overwrite your current setting, repeat instructions.
To turn OFF rapid-‐fire, hold down any one of the trigger buttons and press down on the d-‐pad.
To enter Dual-‐Trigger Mode: hold down your rapid fire button and its opposite button, for example R1 and
L1, then press left on the d-‐pad. The 4th LED will flash one time indicating you are in dual rapid-‐fire mode.
