Customer Services:
www.gardentrading.co.uk
+44 (0)1993 845 559
customerservices@gardentrading.co.uk
Opening Hours: Monday - Friday: 8.30am - 5.30pm (Friday close at 5.00pm)
The Garden Trading Company Ltd, Carterton South Industrial Estate, Black Bourton Road, Carterton, Oxon, OX18 3EZ
Please read through these instructions and ensure they are kept for future reference.
Please note, this fitting is not supplied with a bulb. Bulb required: 1 x E27 LED Max 10W.
Standard screws are included, however these won’t be suitable for all surfaces. Please ensure
you source and use the correct screws for the surface you are mounting this light onto.
Please note, we do not provide replacement or alternative screws.
Extra Information/Notes
1.Once these instructions have been correctly carried out, the mains can be re-connected
and the fitting will be ready for use
2. Please keep these instructions available for future use
3.We recommend cleaning with a soft dry cloth. Don’t use abrasive materials, this may affect the
finish and therefore void the warranty
4.Waste electrical products should not be disposed of with household waste. Please recycle where
facilities exist. Check with your Local Authority or retailer for recycling advice.
Lights that require wiring in:
1.
It is recommended that this fitting is installed by a qualified electrician.
2.
The fitting should be fitted in accordance with current UK Buildings and Wiring Regulations.
3.
Before attempting installation or maintenance, ensure the power is switched off at the mains power switch.
Ensure other persons cannot restore the electricity supply without your knowledge.
4.
If in doubt, please consult a qualified electrician.
5.
To avoid damage to concealed wiring during installation, establish the direction of the supply cable before drilling
fixing holes.
6.
This fitting should be fitted to a lighting supply with a protected 5-amp fuse or equivalent circuit breaker.
7.
Always be sure to use the correct type and wattage of bulb as indicated on the fitting (and stated above)
8.
Do not exceed the maximum wattage stated on the fitting.
9.
Using the incorrect bulb or wattage may cause damage to the light and therefore void the warranty.
10.
When changing the bulb, ensure the mains power supply is switched off and allow the old bulb to cool before
handling. Dispose of bulbs carefully.
Fairford Outdoor Lantern in Carbon
Installation Instructions
Safety Information
