INSTALLATION INSTRUCTIONS
Step Light Linear Recessed 210
GANL-GSLLR5210
NOTE:
1. Gardens at Night fittings should only be connected to approved Gardens at Night 24VDC or 48VDC
Constant Voltage (CV) Power Supplies. FAILURE TO DO SO WILL VOID WARRANTY.
2. Gardens at Night fittings must be wired in parallel and connected in accordance with installation
instructions provided (including soldering of cable joins and sealing using Adhesive Lined End Caps).
FAILURE TO DO SO WILL VOID WARRANTY.
3. Fittings are polarity sensitive and need to be connected red (+) fitting lead to red (+) incoming and
exiting feed cables and black (-) fitting lead to black (-) incoming and exiting feed cables.
4. Do not carry fittings by lead as it may cause damage.
5. Do not connect fittings to constant current (CC) power supplies or AC transformers as this will cause
permanent fitting failure and VOID WARRANTY.
