POP-UP POLY CAGE - INSTRUCTIONS
Fresh ideas for your garden
GardenSkill Ltd. 30 Crossgate Road. Park Farm Industrial Estate. Redditch. Worcestershire. B98 7SN
Tel. 01902 725 055
–
Email. info@gardenskill.com
–
www.gardenskill.com
1. Remove poly cage from bag. Find
a good location for the cage
–
reasonably flat ground is best
2. Pop cage open and turn upside
down so the roof faces the ground.
Unzip door to ease tension
3. Snap rod sections together to
create 2 long rods. Note: rods are
flexible but don’t over
-bend
4. Pass a rod through sewn hoops on
the inside of the roof & insert ends
into the cups at each roof corner. Tie
rod into place
5. Repeat with 2
nd
rod. The two rods
should now form an X shape. Tie
rods together at the apex to form a
domed roof
6. Turn poly cage the right way up
and firmly peg down cage corners
with the ground pegs. Your cage is
now ready to use
Thank you for purchasing our Pop Up Poly Cage. Your kit should include a poly cage, a set of rods and
a bag of ground pegs
For added stability in strong winds:
•
Use extra pegs to secure your poly cage to the ground
•
Attach bamboo canes or aluminium/similar tubes to the sewn tabs at the top edges of the
front and back of the poly cage. Push them firmly into the ground on either side
