Garland Commercial Ranges Ltd.
1177 Kamato Road,
Mississauga, Ontario
L4W 1X4 CANADA
General Inquiries 1-905-624-0260
USA Sales, Parts and Service 1-800-424-2411
Canadian Sales 1-888-442-7526
Canada or USA Parts/Service 1-800-427-6668
Item: ______________________________
Quantity: __________________________
Project: ____________________________
Approval: __________________________
Date: ______________________________
Models:
GI-HO/IN 1500
Induction Green Heat
Garland Induction Built-in Heat Retaining Unit RTCSmp Install Hold-Line
Induc
tion Gr
een Heat
G
ar
land I
nduc
tion Built
-in Heat R
etaining Unit R
TCSmp I
nstall Hold-Line
Built-in induction warm holding system
consisting of:
Induction generator, with two heat
retaining/holding zones, and two
separate control units.
Equipped with the latest RTCSmp
(Realtime Temperature Control System)
technology.
Standard Features
u
Induction generator
:
A generator, developed specifically for heat retaining/holding,
built in an aluminum enclosure, which includes an integrated
air fan.
Fresh air is supplied by the fan, located at the bottom of the
unit. The unit is also equipped with an air guiding system that
directs the hot air out of the housing.
v
Heat retaining plate
:
The heat retaining plate is equipped with the latest RTCSmp
sensor technology which enables temperature controls in real-
time. The set temperature is displayed via a 7-segment display
underneath the Ceran glass. The heat retaining plate includes
five (5) temperature sensors per zone. The unit has two zones
that can be controlled at different temperatures.
Space saving and compact construction with a Ceran glass
on top of the unit, that allows the installation of the unit in
shallow cabinets.
w
Control unit
:
The control switch consists of a chrome sheet metal cover
with a built in power switch. The power switch is enclosed in
polymer housing, with high resistance to external impacts.
The control switch is connected with the generator via an RJ45
cable.
The control unit regulates the temperature in an increment
of 5°F (1°C) and this from 122-212°F (50 to100°C). The set
temperature and the current temperature are shown via the
7-segment display that is located underneath the Ceran glass.
Safety above all
:
• RTCSmp electronic temperature control that monitors the
state of the induction coil, power board, CPU and the Ceran
glass temperature.
• RTCSmp monitors the energy supply
•
No Pan No Heat – Only if an induction suitable pan is
located on the glass that energy will be consumed.
Optional Features
• Optional induction ready holding pans available contact your
dealer for sizes and prices.
CE models comply with the latest European Norms:
EN 60335-1, EN 60335-2-36, EN 62233 (EMC/EMV)
North American models:
ETL listed in compliance with
UL 197, CSA C22.2 No.109, NSF-4
Complies with FCC part 18, ICES-001
