background image

PART #4521777 (08/18/09)

INSTALLATION AND 

OPERATION MANUAL

GARLAND GAS & ELECTRIC

CLAMSHELL GRILLS

WITH PRODUCT RECOGNITION

MODELS:

MWE3W

MWE3S

MWG3W

WARNING:

IMPROPER INSTALLATION, ADJUSTMENT, ALTERATION, SERVICE OR MAINTENANCE CAN CAUSE 
PROPERTY DAMAGE, INJURY OR DEATH. READ THE INSTALLATION, OPERATING AND MAINTENANCE 
INSTRUCTIONS THOROUGHLY BEFORE INSTALLING OR SERVICING THIS EQUIPMENT.

PLEASE READ ALL SECTIONS OF THIS MANUAL AND RETAIN FOR FUTURE REFERENCE.

THIS EQUIPMENT 

MUST

 BE INSTALLED AND COMMISSIONED BY A PROFESSIONAL, 

FACTORY-TRAINED TECHNICIAN.

THIS EQUIPMENT MUST BE OPERATED UNDER AN APPROVED HOOD SYSTEM ONLY.

NOTE:

 This manual pertains to all grill models listed above. The reader/operator must interpret its contents 

to applicable needs. If you have questions about any instructional materials pertaining to Garland grills, 
please contact our Customer Service Department at one of the phone numbers below.

MANUFACTURED EXCLUSIVELY FOR McDonald's BY

GARLAND COMMERCIAL INDUSTRIES, LLC

185 EAST SOUTH STREET FREELAND, PENNSYLVANIA 18224

TOLL FREE: (800) 446-8367 PHONE: (570) 636-1000 FAX: (570) 636-9874

E-mail: clamshell@garland-group.com

http://www.garland-group.com

Summary of Contents for MWE3S





































Reviews: