MDE-5262A Barcode Reader Installation and Setup Instructions · May 2016
Page 1
Introduction
Purpose
This manual provides instructions for installing Orpak
™
’s Payment Terminal (OrPT) Barcode
Kit and Cover (M09680B136).
Verify that the cabinet/pedestal is disconnected from power supply during the course of
the procedure.
WARNING
Intended Users
This manual is intended for Gasboy
®
-trained and certified Authorized Service Contractors
(ASCs).
Table of Contents
Topic
Page
Installing OrPT Barcode Kit and Cover
Required Tools
To install the OrPT Barcode Kit and cover, you require a screwdriver.
Parts List
Following table lists the parts included in the OrPT Barcode Kit:
Item Description
Orpak Part
Number
Quantity
1
Barcode Reader, Hand Held Products (HHP)
813113200
1
2
Card Reader Cover, OrPT Panel
814941200
1
3
Barcode Holder, OrPT Panel
814941400
1
4
Nut, M3
815102500
2
5
Screw, M3 X 8 (including Spring and Flat Washer) 815225200
4
6
Harness Barcode Reader, OrPT
819122525
1
MDE-5262A
Barcode Reader
Installation and Setup Instructions
May 2016