background image

03316 10/15

Important: Retain these instructions for future use.

Gasmate® is a registered trademark of:   

Sitro Group Australia Pty Ltd  www.gasmate.com.au 

 

 

 

 

 

Aber Ltd - Hamilton, N.Z.  www.gasmate.co.nz

GAS SMOKER

Model No. BQ2050

FOR YOUR SAFETY

If you smell gas:

1.  Shut off the gas to the appliance.
2.  Extinguish any open flame.
3.  If odour continues, immediately call 

your gas supplier.

Do not store or use gasoline or other flammable 

vapour and liquids in the vicinity of this or any 

other appliance.

FOR OUTDOOR USE ONLY 

WARNING: 

Improper installation, adjustment, alteration, 

service or maintenance can cause injury or 

property damage.
Read the instructions thoroughly before installing 

or servicing this equipment.

 Traditional style smoker for delicious smoking 

and slow cooking of foods

 10.5MJ/h burner
 Durable steel construction
 4 Adjustable chrome plated wire racks
 10 Hanging meat hooks
 Vitreous enamel smoker box
 3 Heavy duty door and drawer handles
 Door mounted thermometer with chrome bezel
 2 Side handles that double as tool hooks
 Includes water bowl and smoker box to add 

moisture and flavour when cooking

 For outdoor use only
 Universal LPG
 Gas certified to Australian Standards

Summary of Contents for BQ2050





















Reviews: