SUPERLOCK DIGITAL
SINGLE SIDED
Easy to fit - Slim 70mm wide lock case along with adjustable and removable latchbolt ensure easy
fitting to gates.
Secure - The latchbolt moves 15mm ensuring the bolt enters deep into the gatepost.
Durable - The latchbolt is supported on the edge of the gatepost to reduce friction and wear.
Easy to change handing - Handing can be changed on site if required!
This lock has a keypad on one side, handle on the other
PRODUCT DETAILS
Product code: Description:
BDGS1030L
To fit 10-30mm gate frames, left hand
BDGS1030R
To fit 10-30mm gate frames, right hand
BDGS4060L
To fit 40-60mm gate frames, left hand
BDGS4060R
To fit 40-60mm gate frames, right hand
INSTALLATION
1. Drill 2 x 9mm holes at 140mm centres for fixing bolts provided.
2. Drill 18mm clearance hole for the latchbolt at 60mm centres up
from the bottom fixing hole.
3. Hold the lock against the back of the box section and screw on the latchbolt
through the 18mm hole.
4. Lock the latchbolt with the hex key supplied by inserting the hex key into the end of
the latchbolt.
5. Fix lock in place using the stainless steel bolt support plate and the
countersunk screws provided. Ensure the latchbolt moves freely.
6. Fix stike plate by either welding or screw fixing onto the gate post
7.
MAINTENANCE
Every 6 months, lubricate the latchbolt with light oil.
Annually, dismantle the lock and spray mechanism with light oil.
© Copyright Gatemaster 2016
SPECIFICATION
SHEET
193
+44 (0)1243 552066
www.signetlocks.co.uk
VISIT SIGNETLOCKS.CO.UK FOR MORE INFORMATION
BDGS left hand
version shown
