PACKAGE CONTENTS
Power
DUSK-
DAWN
8 Hrs
6 H
rs
4 H
rs
2 H
rs
ON
OF
F
A
C
E
F
D
B
ON
OFF
Part
Description
Quantity
A
Timer
1
B
Remote Control
1
C
Grounded Power Cord (attached to Timer (A))
1
D
Photo Sensor (attached to Timer (A))
1
E
Dial (attached to Timer (A))
1
F
Receptacle (attached to Timer (A))
2
Installation
1
Mounting the timer
□
Mount the timer (A) onto a wall near a GFCI
receptacle with the timer’s photo sensor (D)
facing outward.
□
Install a nail or screw head (not included) into a
wall. The nail or screw must extend at least 7/8
in. out from the wall and allows the timer to be
1 ft. above ground level.
NOTE:
To ensure proper operation of the automatic function,
ensure the photocell sensor is shielded from all night time
sources of light, such as floodlights. Also ensure the photocell
sensor has direct access to sunlight
Powe
r
DU
SK
-
DA
W
N
8 Hrs
6 Hrs
4 H
rs
24
Hrs
ON
OFF
A
Power
D
2
Installing the timer
□
Hang the timer (A) from the eyelet on the top
left of the unit with the receptacles (F)
facing downward.
□
Plug the grounded power cord (C) into
a GFCI outlet.
□
Plug the device(s) you wish to be on a timer
into either of the two receptacles (F).
Power
DUSK-
DAWN
8 Hrs
6 H
rs
4 H
rs
24 H
rs
ON
OF
F
A
F
C
Operation
Adjusting the timer settings
□
Rotate the dial (E) on the timer (A) to select one
of the following settings:
DUSK-
DAWN
8 Hrs
6 H
rs
4 H
rs
2 H
rs
ON
OF
F
A
E
Dial Setting
Function
OFF
Turns the timer Off.
ON
Turns the timer On.
DUSK-DAWN
The timer turns the attached device On at dusk and Off at dawn.
2 Hrs
The timer turns the attached device On at dusk and Off two hours later.
4 Hrs
The timer turns the attached device On at dusk and Off four hours later.
6 Hrs
The timer turns the attached device On at dusk and Off six hours later.
8 Hrs
The timer turns the attached device On at dusk and Off eight hours later.
Using the remote control
This timer includes a remote control that allows for a
temporary override of the timer settings. For example,
if the timer is On and in the middle of a 2-hour timer
setting, turning the remote control On restarts the 2
hour countdown on the timer.
□
When the dial (E) on the timer (A) is in the On
position, press the Off button on the remote
control (B) to turn the timer (A) Off.
□
When the dial (E) on the timer (A) is in the Off
position, press the On button on the remote
control (B) to turn the timer (A) On.
□
When the dial (E) on the timer (A) is in either
the DUSK-DAWN, 2, 4, 6, or 8 Hrs position, press
the On button on the remote control (B) to turn
the timer (A) and the devices plugged into the
timer On. Devices will remain On based upon
the dial (E) setting.
□
When the dial (E) on the timer (A) is in either
the DUSK-DAWN, 2, 4, 6, or 8 Hrs position, press
the Off button on the remote control (B) to turn
the timer (A) and the devices plugged into the
timer Off. Devices will remain Off until dusk or
until manually turned On.
DUSK-
DAWN
8 Hrs
6 H
rs
4 H
rs
2 H
rs
ON
OF
F
A
E
B
ON
OFF
Maintenance
Replacing the remote
control battery
□
Remove the battery cover of the remote
control (B) and replace the old battery with a
new CR2032 battery. Ensure the new battery
matches the polarity markings inside of the
remote control battery compartment.
□
Replace the battery cover of the
remote control (B).
B
ON
OFF
Safety Information
PRECAUTIONS
1. Before using this timer, please read the following
instructions carefully.
2. This timer is rated at 15 AMPS General Purpose
1250W Tungsten 125Vac, 60Hz, 1/2 HP. The
Tungsten rating relates to the total wattage of light
bulbs used.
WARNING
RISK OF ELECTRIC SHOCK
•
DO NOT USE WITH AN EXTENSION CORD
•
PLUG DIRECTLY INTO A GFCI PROTECTED
ELECTRICAL OUTLET
•
UNPLUG TIMER BEFORE CLEANING
•
FULLY INSERT PLUG
•
KEEP CHILDREN AWAY
RISK OF FIRE
•
DO NOT USE TO CONTROL APPLIANCES THAT
CONTAIN HEATING ELEMENTS (COOKING APPLIANCES,
HEATERS, IRONS, ETC.)
•
DO NOT EXCEED ELECTRICAL RATINGS
FCC STATEMENT
This device complies with part 15 of the FCC and Industry Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
□
Reorient or relocate the receiving antenna.
□
Increase the separation between the equipment and receiver.
□
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
□
Consult the dealer or an experienced radio/TV technician for help.
□
CAN ICES-3(B)/NMB-3(B)
Warranty
The manufacturer guarantees this product to be free of defects in materials and workmanship for 1 year from the
date of purchase.
USE AND CARE GUIDE
Model #15143
OUTDOOR TIMER WITH
REMOTE CONTROL
Pre-Installation
PLANNING FOR SUCCESSFUL INSTALLATION
When choosing a location for the placement of the timer and remote, avoid any sources of possible RF interference
such as fluorescent lighting. Proximity to these and other sources of RF interference can inhibit the proper
functioning of the timer.
The wireless signals between the timer and the remote pass easily through your home’s interior walls, but the signal
may be reflected by power wires or plumbing inside those walls. A slight adjustment to the position of the timer and/
or remote will improve sensitivity.
NOTE:
To ensure proper operation of the automatic function,
ensure the photocell sensor is shielded from all night time
sources of light, such as floodlights. Also insure the photocell
sensor has direct access to sunlight
TOOLS REQUIRED
Claw hammer
Phillips
screwdriver
Flathead
screwdriver
