GE
Lighting
Installation Guide
imagination at work
(LVT Series, 120-277V and 347V)
Lumination
TM
LED Luminaires
BEFORE YOU BEGIN
Read these instructions completely and carefully.
WARNING/AVERTISSEMENT
RISK OF ELECTRIC SHOCK
• Turn power off before inspection, installation or removal.
• Properly ground electrical enclosure.
RISK OF FIRE
• Follow all NEC and local codes.
• Use only UL approved wire for input/output connections.
Minimum size 18 AWG (0.75mm
2
).
RISQUES DE DÉCHARGES ÉLECTRIQUES
• Coupez l’alimentation avant d’’inspecter, installer ou déplacer le luminaire.
• Assurez-vous de correctement mettre à la terre le boîtier d’alimentation électrique.
RISQUES D’INCENDIE
• Respectez tous les codes NEC et codes locaux.
• N’utilisez que des fils approuvés par UL pour les entrées/sorties de connexion.
Taille minimum 18 AWG (0.75mm
2
).
LVT 24 Series
LVT 22 Series
LVT 14 Series
Save These Instructions
Use only in the manner intended by the manufacturer.
If you have any questions, contact the manufacturer.
Components Supplied
Prepare Electrical Wiring
Tools and Components Required
Electrical Requirements
•
The LED luminaire must be connected to the mains supply
according to its ratings on the product label.
Grounding Instructions
•
The grounding and bonding of the overall system shall
be done in accordance with National Electric Code (NEC)
Article 600 and local codes.
•
Slot or Philips screwdriver
•
UL Listed conduit connections per NEC/CEC for nominal
conduit trade sizes ½” or ¾”
•
UL Listed wire connectors
•
Luminaire