TM
JB988TH/KH/BH – GE Profile
™
30" Free-Standing CleanDesign Electric Range
Dimensions (in inches)
30
25
29-7/8
46-1/2
2-1/2
7-1/2
25-3/8*
47-5/8
2-1/2
Acceptable electrical
outlet area
30_install_fse_profile.eps
*Dimension from wall to front of
closed oven door handle is 27-3/8
on JB988/968/910/900 models
and 27-3/4 on model JBP49.
†
Note:
Check local codes for required breaker size.
Effective January 1, 1996, the National Electrical Code requires that new construction (not existing)
utilize a 4-conductor connection to an electric range.
Receptacle Locations
Locally approved flexible service cord or conduit must be used because terminals are not accessible
after range installation. See shaded area in drawing for location of electrical outlet box.
Recommended outlet locations allow range to be installed directly against wall.
Note:
30" ranges conform to U.L. requirements for 0" spacing from adjacent walls below countertops.
To reduce possibility of scorching walls, engineering recommends a minimum of 1-1/2" spacing to
allow for possible extended, high-heat, no-load heating element operation.
Installation Information:
Before installing, consult installation instructions packed with product for
current dimensional data.
KW Rating
240V
13.0
208V
10.9
Breaker Size
40 Amps
†
R
Listed by
Underwriters
Laboratories
For answers to your Monogram,
®
GE Profile
™
or
GE
®
appliance questions, visit our website at
ge.com or call GE Answer Center
®
service,
800.626.2000.
All GE ranges are equipped with
an Anti-Tip device. The installation
of this device is an important,
required step in the installation
of the range.
Specification Revised 6/05
221074
