THE GUIDELINE FOR LED TAPE LIGHT
MODEL:
Item No: 82159LO
Made in
IMPORTANT SAFETY INSTRUCTIONS:
(a)
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
(b) Do not cover this product as the covering may cause the flexible light to overheat and melt or ignite.
(c) Do not operate with the flexible light tightly coiled.
(d) Do not puncture, cut, shorten, or splice the flexible lighting.
(e) Do not route the cord or flexible lighting through walls, doors, windows or any like part of the building structure.
(f) Do not use if there is any damage to the light or cord insulation. Inspect periodically.
(g) Do not submerge flexible light in liquids, or use the product in the vicinity of standing water or other liquids.
(h) Secure this flexible light using only the hangers or clips provided. Do not secure this product or its cord with
staples, nails, or like means that may damage the insulation or permanently attach to the building structure.
(i) Do not subject flexible lighting to continuous flexing.
(j) This product has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric
shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the
plug, if it still does not fit, contact a qualified electrician. Never use with an extension cord unless plug can be
fully inserted. Do not alter or replace the plug.
(k) All units must be unplugged before adding additional segment.
(l) Use only the same series extension segments model manufactured by the same manufacturer, .
(m) Ensure all connections and the end cap on the last segment is tightly secured to preclude the entry of water.
(n) Do not install on gates or doors, where subject to flexing.
(o) Do not mount or secure
light in a manner that can cut the outer jacket or damage the cord insulation.
Inspect the
light carefully before use and discard any
light that have broken outer jacket, loose
connections, or frayed wire insulation.
(p) Risk of fire. Do not replace attachment plug. Contains a safety device (fuse) that should not be removed.
Discard product if the attachment plug is damaged.
(q) Do not rub or knead the products continuously, the smallest bending radius is more than 8cm.
(r) Do not operate with the flexible light tightly coiled. To prevent overheating do not allow contact between flexible
light cables and parts of light cables. Maintain at least 12mm spacing between flexible light cables or parts of
light cables.
(s) Do not install in cabinets, tanks or enclosures of any kind.
WARNING
-
SAVE THESE INSTRUCTIONS
WARNING
:
When using “outdoor” use
lighting products, basic safety
precautions should always be followed to reduce the risk of fire, electric shock, and
personal injury, including the following:
READ ALL INSTRUCTIONS
RTL-FPC-2835-2.5cm-19.6FT-120V-Ex-R
120V, 60Hz, 0.106A
Vietnam
For questions and/or assistance, call customer service at 1-877-398-7337 or visit us on the web at
www.geholidaylighting.com
PRINTED IN
MADE IN
©2021 Nicolas Holiday Ltd., 9F., No. 37, Guangfu N. Rd. Taipei, Taiwan 10560.
All rights reserved.
NV 0421
VIETNAM
VIETNAM
(a) Ground Fault Circuit Interrupter (GFCI) protection should be provided on the circuits or outlet to be used for the
outdoor use flexible lighting product. Receptacles are available having built-in GFCI protection for this measure
of safety.
(b) Use only outdoor extension cords, such as type SW, SOW, STW, STOW, SJW, SJOW, SJTW, or SJTOW. This
designation is marked on the wire of the extension cord.
(c) Do not install closer than 3 meters from a swimming pool surface.
