1
2
3
INSTRUCTION MANUAL
!!!Please refer to our website: www.geemarc.com
for an up to date user guide, as there may be
important updates and changes you need to be
aware of !!!
Cautions:
Precautions and maintenance
z
For indoor use only
z
To avoid risk of fire or electric shock, do not expose the unit to
moisture or condensation.
z
To avoid overheating, do not block the ventilation holes on the
back of the Clock Display.
z
Keep the Clock Display out of direct sunlight.
z
Do not dismantle the Clock Display. There is a risk of electric
shock and there are no user-serviceable parts inside.
Dismantling the Clock Display will void your warranty.
Cleaning the LCD Screen
z
Treat the screen carefully. tThe screen of the Clock Display is
made of glass and can easily be broken or scratched.
z
If fingerprints or dust accumulate on the LCD screen, we
recommend using a soft, non-abrasive cloth such as a camera
lens cloth to clean the LCD screen.
z
Moisten the cleaning cloth with a cleaning solution and apply the
cloth to the screen.
Introduction:
Thank you for the purchase of the Clock Display. It is designed to
allow you to see the time quickly and easily. Please read this User
Manual carefully to learn the correct way to use the Clock Display.
Features:
Days Clock
Packaging Check List:
z
9 inch Clock Display
z
User manual
z
Bracket
z
AC adapter
1. Product Diagram
1.1 Back side Buttons
1.2 Left side of the Clock Display
DC in “
” on the left side of the Clock Display.
2. Getting Started
1. Place the Clock Display with installing bracket in a steady flat
position. Then plug one end of the AC adapter into a standard
100-240V AC electrical outlet and the other end into the DC IN
slot on the left side of the Clock Display.
2. Remove the protective film covering the Screen.
3. Hold and Press the power button
on the backboard to turn
On / Off the Viso30.
3. Operating Instruction
When you power the unit on for the first time it will show the
startup logo. Then the main menu will display after a few seconds.
After this the Days Clock will display.
You can easy see the details week day, time, month and year on
the Clock Display screen, and they will change automatically.
4.Setting
Press
Menu
key and select the
Setting
icon
in the main menu.
Press “
”
Button to enter the
Setting
interface and press
or
to highlight your selection. Press “
”
Button to enter the
setting value. Then press
or
to set the value.
You can select Style Setup, Set Days-Clock, Calendar Setup,
System Setup, and so on.
4.1. System Setup
Language
Changes the operating language of the photo Clock Display.
Available Values: English, Nederland, Français, Deutsch, Italiano,
Espanol, Hebrew. Use the buttons
or
to select the language.
Grayscale
Press
and
buttons to select the Gray Scale level that you
require between 1 to 10.
Brightness
Press
and
buttons to select the Brightness level that you
require between 1 to 10.
Contrast
Press
and
buttons to select the Contrast level that you
require between 1 to 10.
Auto power on & off function Remarks:
1. In order to activate the auto power ON & OFF function, please
check the settings for the
Auto Shut Time
,
Sleep timer, Auto
boot Time and Regular Boot
are set correctly. If set to
OFF
,
the function is not activated.
2. A reminder for the Auto OFF appears 1 Minute before the frame
switches off. Press any key to cancel the Power OFF function.
3. If Power OFF is activated and the frame switches off at the
selected time, the frame goes into Sleep-mode. To switch the
frame on again, you need to press the “Power”
Button on
the Remote or the rear side off the frame twice.
Auto Shut Off Time
Set the auto power off time in the format of “[Hour]: [Minute]”. In
System setup / Auto shut time.
Press
button to select. Use
the
and
buttons to switch between fields. Press
or
buttons to change time field values. Press
button to validate.
Keep the Sleep Timer on. Press Menu button to exit.
Auto Power On Time
Set the auto power on time in the format of “[Hour]:[Minute]” in
System setup/Auto Boot time
. Press
button to select. Use
the
or
buttons to switch between fields. Press
or
buttons to change time field values. Press
button to validate.
Keep the Regular Boot on. Press Menu button to exit.
Power Frequency:
You can choose to set the function auto power ON/OFF as follows:
- Workday, Week end, Once, Every day. Use the
or
buttons
to change mode field values.
1. Power on/off
2. Up
3. Right
4. Play / Pause / OK
5. Left
6. Down
7. Menu
