www.GenieCompany.com/commercial
|
800.843.4084
GCL-MJ operators are covered by the following U.S. patents: 7355363, 7878931, 8014966
The GCL-MJ is designed for high or full-lift
sectional and rolling doors that have a limited-duty
cycle requirement. Advanced features and robust
mechanical design combine to provide a medium-duty
operator that is the new standard in the industry.
UL325-2010 APPROVED
• Allows for monitored entrapment protection and momentary
operation when used with select photo eyes and/or
edge-sensing devices.
• See back for approved list of monitored devices.
GCL-MJ Advantages
• Rated for 15 cycles per hour operation, maximizing
performance out of a medium-duty operator.
• Modular design with optional expansion boards for advanced
timer to close, and auxiliary output functionality.
• Optional: Intellicode
®
I plug and play receiver learns up to 50
transmitters. Learn and delete individual transmitters directly
from LCD display.
• TensiBelt
™
primary drive reduction eliminates need to adjust
belt tension.
• Available in either 115V or 230V AC 1Ø 60Hz. Expanded
offering increases applications available for medium-duty use.
• Motor with built-in thermal protection and ball bearing drive
end. Provides overload protection and bearings extend life of
motor over typical bushings.
• LCD display with intuitive setup menu. Provides real-time
status and troubleshooting assistance.
• Open/close/stop and setup keys included on control board.
Keeps all controls near the LCD display convenient for set up.
Standard Features
• Optical limit system with linear travel nuts.
• Max run timer automatically adjusts to up and down run time.
• TensiBelt
™
primary reduction.
• Delay on reverse.
• 16-character LCD display.
• UL325-2010 approved.
• 3-button control station.
• 2-year/20,000-cycle warranty.
• Programmable mid-stop.
• Pull-cord release for emergency manual operation.
GENIE
®
CoMMErCIAL opErATors
GCL-MJ
MEDIUM-DUTY JACKSHAFT OPERATOR
