background image

  English   

 

READ THIS FIRST 

Please start by reading the important messages below first. 

1.  The bundled driver, software, design, specifications and user’s manual that were 

packaged with the camera are subject to change without notice. 

2.  The accessories that come with the camera may vary between regions. 

3.  For driver updates, you can contact the dealer where you purchased the camera for help. 

4.  We are not liable whatsoever for any compensation arising from errors in descriptions in 

this user’s manual. 

WARNINGS 

  

Do not use the camera if it is emitting smoke, becomes unusually hot to be touched, 

emitting any unusual odor or noise, or if it is in any other abnormal state. Operating the 

camera in any of these situations may cause a fire or an electrical shock. Stop using 

the camera immediately, turn the camera off, and then disconnect the power source 

(batteries or AC power adapter). (If you are using the AC power adapter, unplug the 

adapter from the AC power outlet  after you have disconnected the camera.) After 

checking that smoke is no longer  being emitted, contact your dealer or a local 

authorized service facility and  request repairs. Never attempt to repair the camera 

yourself as this is dangerous. 

  

Do not use the camera if any foreign objects have entered the camera. Turn the 

camera off, and then disconnect the power source (batteries or AC power adapter). (If 

you are using the AC power adapter, unplug the adapter from the  AC power outlet 

after you have disconnected the camera.) Then contact your  dealer or a local 

authorized service facility. Do not continue to use the camera as this may cause a fire 

or an electrical shock. 

  

If the camera has been dropped or if the camera case has been damaged, turn  the 

camera off, and then disconnect the power source (batteries or AC power adapter). (If 

you are using the AC power adapter, unplug the adapter from the  AC power outlet 

after you have disconnected the camera.) Then contact your  dealer or a local 

authorized service facility. Do not continue to use the camera as this may cause a fire 

Summary of Contents for P313









































Reviews: